SolaX X3-AELIO-60K 60kW three-phase C&I hybrid inverter60kW three-phase commercial hybrid inverter, 6 MPPT

Overview

The X3-AELIO-60K delivers 60kW rated and 66kVA maximum output, with six MPP trackers of 40A and two strings each, so up to 120kWp of PV can be connected. Two battery ports with 80A each feed 180–820V lithium storage, for example HR140 rack clusters with 7–14 TB-HR140 packs. In off-grid operation it supplies 60kVA continuously and 90kVA for 10 seconds, and five units can be paralleled with an X3-PBOX-300kW-G2.

• 50kW (5 MPPT) and 60kW (6 MPPT)
• 40A per MPPT, two strings each, 1000V max.
• Two battery ports, 180–820V, 160A total
• EPS under 10ms, 150% for 10 seconds
• 100% three-phase unbalance, 110% long-term overload
• IP66, CEI 0-21, CEI 0-16, VDE-AR-N 4105, EN 50549

How it works

The X3-AELIO is SolaX's commercial and industrial hybrid inverter and the power unit of its split C&I storage solutions. It connects up to six MPP trackers, two high-voltage battery ports and a three-phase grid, and supplies backup loads through its EPS output with a switch-over time under 10ms. Operating modes include Self-use, Feed-in Priority, Backup, Peak Shaving, TOU, EPS and Manual, covering self-consumption, peak shaving and demand management.

Three inverters can run in parallel without additional hardware; with an X3-PBOX-300kW-G2 the X3-AELIO-50K scales to six units and the 60K to five. A generator can be integrated for fuel saving and backup, and VPP functions via IEEE 2030.5 and OpenADR are announced by SolaX as future upgrades.

Key features

Each MPP tracker takes two strings and 40A (50A short-circuit) between 160V and 950V, with 1000V maximum and 180V start-up. SolaX permits PV arrays of twice the rated power, 100kWp on the 50kW and 120kWp on the 60kW model. The two battery ports accept 180–820V lithium batteries with 80A each, 160A in total.

The inverter supports 100% three-phase unbalance, 110% long-term overload on grid and 150% in off-grid operation, with EPS peaks of 75kVA or 90kVA for 10 seconds. Maximum efficiency is 98.0% and European efficiency 97.2%. Smart air cooling, Type II surge protection, a built-in auxiliary power supply and optional AFCI are part of the design.

Installation and compatibility

The IP66 housing measures 670×820×257mm and weighs under 100kg (50K) or 105kg (60K), so SolaX recommends a lifting device; it operates from -35°C to +60°C with derating above 45°C. At least 80cm must stay free below the terminals for cable bending. The manual describes battery clusters of one TBMS-R15 and 7–14 TB-HR140 packs, and SolaX also publishes AELIO solutions with HS51 and HR76 batteries.

Grid certifications include CE, VDE-AR-N 4105, G99, AS 4777, EN 50549, CEI 0-21, IEC 61727, RD1699 and TOR. For Italy SolaX publishes CEI 0-21 and CEI 0-16 certificates for the X3-AELIO-49.9K, 50K, 60K and 61K with the TB-HR140 storage system, covering low-voltage and medium-voltage connections.

Monitoring and settings

Remote monitoring and OTA updates run through SolaXCloud on web and app with a SolaX dongle. Interfaces include separate RS485 ports for meter, monitoring and daisy-chained parallel operation, CAN for the BMS and for parallel links, USB, two digital inputs, one digital output, a ripple-control receiver input with four DIs and DRM.

Questions and answers