TW Solar TWMNH-66HD625W 625Wp bifacial – pallet of 36 modules (22.5kWp)Pallet of 36 bifacial dual-glass TNC modules, 625Wp each

Overview

A pallet of 36 TW Solar TWMNH-66HD625W bifacial dual-glass modules, 22.5kWp in total. The module has 132 TNC half cells on G12R wafers in a 2,382×1,134×30mm, 32.1kg laminate with an anodised aluminium frame. It gives 625Wp at 23.1% efficiency, 49.30V Voc and 16.12A Isc, and 690.2W with 135W/m² on the rear side. Tongwei targets the series at commercial and industrial rooftops and utility-scale plants.

• Tongwei TNC n-type cells, half-cut
• Dual glass, bifaciality 80±5%
• 1500V DC system voltage
• Pmax temperature coefficient down to -0.28%/°C
• 12-year product and 30-year linear power warranty

Technology

TW Solar is the module brand of Tongwei, which also produces polysilicon and cells. The modules in this range use Tongwei's TNC n-type monocrystalline cells (tunnel-oxide passivated contact), cut in half to lower resistive losses. All are dual-glass bifacial laminates with 2.0mm semi-tempered glass on both faces, an anodised aluminium frame and an IP68 junction box with three diodes, rated for 1500V DC and a bifaciality of 80±5% on Pmax.

Versions offered

The Tongwei installation manual groups the models by cell format. TWMND-72HD uses 144 half cells cut from M10 wafers in a 2,278×1,134×30mm module of 31.5kg. TWMNH-66HD has 132 half cells on G12R wafers in a 2,382×1,134×30mm, 32.1kg format. TWMNF-66HD uses 132 half cells on full G12 wafers, giving a wider module of 2,384×1,303×33mm and 37.3kg with a short-circuit current above 18A.

Packing quantities follow the format: 31 modules per pallet and 620 per 40ft container for the TWMND-72HD, 36 per pallet and 720 per container for the TWMNH-66HD, and 33 per pallet and 594 per container for the TWMNF-66HD. The datasheets also list output at 135W/m² rear irradiance and at rear gains of 5%, 15% and 25%.

Installation notes from the manual

Tongwei asks for at least 10cm between the module frame and the roof surface for ventilation, a tilt of at least 10° so rain removes dust, and the same angle for every module of a string. Clamp mounting needs at least four symmetrically placed clamps that overlap the frame by at least 10mm without touching the glass. Drilling the glass or frame voids the warranty.

For sizing cables, fuses and other equipment the manual multiplies the marked Isc by 1.25, and each parallel string must have its own fuse. Different module models must not be mixed in the same PV system. For offshore installations within 50m of the coastline Tongwei requires its dedicated offshore modules.

Questions and answers