Solis solar kit 24.24kWp – S6-EH3P20K-H 20kW three-phase hybrid inverter, battery-ready24.24kWp PV kit with 20kW three-phase high-voltage hybrid inverter, no battery

Overview

A 24.24kWp kit of 48 modules of 505Wp with the Solis S6-EH3P20K-H, the 20kW model of the high-voltage S6 three-phase hybrid range. It accepts 32kW of usable PV input on four MPPTs and a 120–800V lithium battery at up to 50A. The grid-to-load passthrough is rated 45.6A at 220V and 43.3A at 230V, and the backup port switches over in less than 10ms.

• Solis S6 hybrid inverter with matched PV module set
• Battery not included; storage can be added later
• 48V models or 120–800V high-voltage models
• Backup switch-over under 10ms with generator input
• IP66 enclosures, CEI 0-21 and EN 50549 certificates
• Monitoring through SolisCloud with WiFi, LAN and Bluetooth

What's in the kit

• 1 × Solis S6-EH3P20K-H
• 48 × 505Wp PV module

How the kits work

Each kit pairs a Solis S6 hybrid inverter with PV modules sized above its AC rating but below Solis' recommended maximum array size. From the first day the system self-consumes and exports or limits surplus energy like a grid-tied plant. The battery is left out so it can be chosen later; Solis states that the S6-EH3P(29.9-50)K-H runs as a grid-tied inverter without batteries when on-grid, and publishes a battery matching list for all hybrid series.

Inverter options

The single-phase S6-EH1P8K-L-PLUS and the three-phase S6-EH3P10K02, 12K02 and 15K02-NV-YD-L work with 48V batteries (40–60V, lithium or lead-acid) and charge at up to 190A, 220A, 250A or 290A; the three-phase models have two battery ports. The S6-EH3P15K-H and 20K-H take high-voltage lithium batteries of 120–800V at 50A and offer four MPPTs. The S6-EH3P30K-H has three MPPTs and two battery inputs of 150–800V at 70A each.

Backup and energy management

All models have a backup output that takes over in less than 10ms on the three-phase models and 4ms on the single-phase one, a generator input and support for unbalanced loads. Backup overload ranges from 1.6 to 2 times rated power depending on model. The three-phase LV and 15–20kW HV models list a 7-inch display, WiFi, LAN, Bluetooth, CAN for the BMS, two CAN parallel ports and an RS485 meter port, so export limitation and parallel systems need only the meter and cables.

Installation and what to add

Solis rates all these inverters IP66 for outdoor installation from -25…+60°C (-40°C for the EH1P), with fan cooling. CEI 0-21 declarations and EN 50549-1/-10 certificates are published for each series. The installer adds the mounting structure, DC string cabling and protections, AC breakers and residual-current device, the Solis-approved meter for export control and the grid connection paperwork, plus the battery and its cabling when storage is installed.

Questions and answers