Italian company since 2015 · litio.storeGenuine products · Full manufacturer warrantyReal people, real answers · Quote within 1–2 working days

Dyness · BMS and protection

Dyness Tower Pro BDU with baseControl unit and base for Tower Pro towers of 2–6 HV9640 modules, 168–648V, 40A, IP55

40A

€398.82ex. VATIndicative price · shipping excluded, by pallet
See the shipping cost

Batteries and inverters travel on a pallet with a freight carrier. The cost depends on the country and on the total weight of the order, excluding VAT.

Package weight: 27kg

CountryHalf pallet, up to 500kgFull pallet, up to 750kg
Austria€230.00€320.00
Belgium€230.00€320.00
Bulgaria€320.00€410.00
Croatia€320.00€410.00
CyprusOn request
Czechia€230.00€320.00
Denmark€230.00€320.00
Estonia€320.00€410.00
Finland€320.00€410.00
France€230.00€320.00
Germany€230.00€320.00
Greece€320.00€410.00
Hungary€320.00€410.00
Ireland€320.00€410.00
Italy€230.00€320.00
Latvia€320.00€329.24
Lithuania€320.00€410.00
Luxembourg€230.00€320.00
MaltaOn request
Netherlands€230.00€320.00
Poland€230.00€320.00
Portugal€320.00€410.00
Romania€320.00€410.00
Slovakia€320.00€410.00
Slovenia€320.00€410.00
Spain€230.00€320.00
Sweden€320.00€410.00

Above 750kg the pallets add up: 1,000kg, for example, is one pallet plus a half. In the quote we calculate shipping on the weight of the whole order.

38 availableStock updated daily by Litio Store

Buy now on litio.store

Or add the product to your quote: we reply within 1–2 working days. The button opens your cart on litio.store, our online shop.

Configure your system in two minutesPick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and the full bill of materials, ready for your quote.Open the configurator →
How to buy

Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.

Sold by Litio Store SRL

An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.

About us
Genuine product, full manufacturer's warranty

New, genuine Dyness products with the full manufacturer's warranty and all their documentation.

Overview

The control set of every Dyness Tower Pro: the BDU (battery disconnect unit) that closes the top of the stack and the base the HV9640 modules stand on. The BDU carries the DC breaker, the wake button, the DC sockets and the CAN/RS485 port to the inverter, two parallel ports for multi-tower systems and a Wi-Fi module for the Dyness app and remote firmware updates. With two to six HV9640 modules it forms the TP7 to TP23 towers, 7.68–23.04kWh between 168 and 648V, charging and discharging at up to 40A when it communicates with the inverter. BDU and base weigh 28.5kg together and add 338mm to the tower height. The modules are sold separately; up to 12 towers can run in parallel.

  • HV9640 modules: 96V, 40Ah, 3.84kWh each
  • 2 to 6 modules per tower, 7.68–23.04kWh
  • 1C charge and discharge with inverter communication
  • IP55, built-in aerosol fire extinguisher
  • Up to 12 towers in parallel, 276.48kWh
  • Optional heating for charging down to -20°C

How it works

Tower Pro is a stack of HV9640 lithium iron phosphate modules on a base, topped by the battery disconnect unit (BDU). Each module contains 30 cells of 3.2V and 40Ah in series and adds 96V and 3.84kWh. The five configurations, TP7, TP11, TP15, TP19 and TP23, use two to six modules and run at 192V to 576V nominal, from 7.68kWh to 23.04kWh. Dyness rates 95% depth of discharge, so a TP23 offers 21.888kWh usable.

Modules are connected by composite plug-and-socket connectors that carry power, communication and heating lines, so the stack needs no cables between modules. Modules identify themselves when stacked. The base sits under the stack and the BDU on top, and a tower is completed by fixing brackets that hold it against the wall.

Key features

When the battery communicates with the inverter it charges and discharges at up to 40A, which is 1C: a TP7 handles 7.68kW and a TP23 23.04kW. Dyness states at least 8,000 cycles at 0.2C, 25°C and 95% depth of discharge to 70% end of life.

The IP55 enclosure is naturally cooled, each tower has a built-in aerosol fire extinguisher, and Dyness allows modules of different ages to be mixed within three years. Heated versions start heating below 2°C ambient, powered by the inverter or by the battery itself down to 20% state of charge, and stop once the coldest cell is above 5°C.

Installation and compatibility

The tower stands on the floor and is fixed to the wall with brackets; leave 300mm around it and keep it out of direct sun, rain and snow. The earth connection must be below 100mΩ. A tower is 587mm wide and 310mm deep, its height being 338mm plus 220mm per module. Up to 12 towers of the same model and capacity can run in parallel if their voltages are within 20V and all are fully charged.

Two inverter cables are supplied: one marked RS485 for KOSTAL, one marked CAN for Solis, GoodWe, Solinteg, Deye, Sineng, ATESS, Sinexcel, Solplanet and others. Dyness lists Tower Pro certifications to IEC 62619, IEC 63056, IEC 62477, IEC 62040, VDE-AR-E 2510-50, CEI 0-21 and CEI 0-16.

Monitoring and warranty

The BDU front shows run, communication, fault and state-of-charge LEDs, and its Wi-Fi module links the tower to the Dyness app and web portal for monitoring and remote firmware updates. In Europe the warranty is ten years with 70% usable energy retention or a minimum energy throughput per model, and can be extended to 15 years. Batteries used without inverter communication are covered for three years only.

Questions and answers

What does the BDU do and is it needed?

Yes, every tower needs one BDU and one base. The BDU contains the DC breaker, the WAKE button, the inverter CAN/RS485 port, the parallel ports and the Wi-Fi module; the modules alone cannot be connected to an inverter.

How many towers can be connected in parallel?

Up to 12 Tower Pro towers, giving a maximum of 276.48kWh with six modules each. The towers must be the same model and capacity, within 20V of each other and fully charged when connected.

Can I add modules later?

Yes. A tower can grow from two to six modules, and Dyness allows mixing old and new modules within three years. Check that your inverter is approved for the new tower size on the Tower Pro compatibility list.

Is Tower Pro compatible with KOSTAL inverters?

Yes. The compatibility list includes KOSTAL PLENTICORE plus, PLENTICORE G3 and other PLENTICORE models for all five tower sizes, using the RS485 cable supplied with the battery.

Can the battery charge below freezing?

Only the versions with heating function. Without heating the charge range is 0°C to +55°C; with heating it extends to -20°C. Discharge is allowed from -20°C to +55°C.

You may also like

BMS and protectionDyness SBDU100 control unit with base – BMS and protection – photo 1

Dyness

SBDU100 + base

100A

from€740.00ex. VATIndicative price · shipping excluded, by pallet

13 available

BMS and protectionDyness STACK100 Pro control unit (SBDU100 Pro) with base – BMS and protection – photo 1

Dyness

SBDU100 Pro + base

100A

from€816.47ex. VATIndicative price · shipping excluded, by pallet

77 available

BMS and protectionDyness STACK280 control unit (SBDU200) with base – BMS and protection – photo 1

Dyness

SBDU200 + base

200A

from€972.35ex. VATIndicative price · shipping excluded, by pallet

21 available

BMS and protectionREDARC SBI12-BLD BMS load disconnect isolator – BMS and protection – photo 1

Redarc

SBI12-BLD

100A12V

from€143.41ex. VATIndicative price · EU delivery included

Available — quantity not tracked

  • Italian company since 2015Litio Store SRL, Sigillo (Perugia)
  • Genuine productsFull manufacturer warranty
  • Datasheets and manualsFor every product, ready to download
  • Real people, real answersQuote within 1–2 working days

PV Radar

Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.

What would you like to receive?