
Dyness
Tower Pro BDU + base
40A
38 available

Dyness · BMS and protection
100A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Dyness products with the full manufacturer's warranty and all their documentation.
The control set of a Dyness STACK100 Pro cluster: the SBDU100 Pro control unit and the base, both in the IP66 housing of the series. Together they carry three to fifteen S51100 Pro modules in series, 15.36 to 76.8kWh between 134.4 and 864V, with up to 100A continuous current. The control unit links the cluster to the inverter over CAN or RS485 and has a Wi-Fi module for the Dyness app with over-the-air updates; up to 12 clusters can run in parallel. The SBDU100 Pro measures 657×460×193mm and weighs 23.5kg; the base is 99mm high and brings the pair to 34.6kg. Like the modules, it can be installed indoors or outdoors, out of direct sunlight. Modules are sold separately.
STACK100 Pro stacks 51.2V, 100Ah lithium iron phosphate modules in series on a base, under the SBDU100 Pro control unit. Three to fifteen S51100 Pro modules form a cluster of 15.36kWh to 76.8kWh with an operating voltage of 134.4V to 864V. Modules connect by stacking, with no cables between them, and Dyness quotes one cluster installed in about 30 minutes. Each module measures 657×459×191mm and weighs 55kg; the SBDU100 Pro control unit weighs 23.5kg.
The electrical ratings match STACK100: 0.5C (50A) recommended, 1C (100A) maximum and 125A for two minutes at 25°C, i.e. 2.56kW recommended and 5.12kW maximum per module, with 95% depth of discharge. The differences are mechanical. The IP66 housing is cooled by natural convection and stays at or below 50dB, and the safety concept combines a pressure relief valve, an aerosol extinguisher and temperature probes, with aerogel pads and module fire protection as options. Heating for charging down to -20°C is optional.
Thanks to IP66 the manual allows indoor and outdoor installation, away from flammable materials and out of direct sunlight. The manual specifies minimum clearances of 100mm to 300mm around the cluster and suggests two columns for more than eight modules.
Up to 12 clusters run in parallel when voltages are within 20V, all are fully charged and the youngest is less than three years newer; parallel clusters use the CAN-labelled cable. The datasheet names Solis, GoodWe, Deye and Solinteg among the compatible inverter brands; the manual adds Solplanet, Sunways, Hoymiles, SAJ, Sinexcel, ATESS, Megarevo and Sineng.
A Wi-Fi module in the control unit connects the system to the Dyness app with over-the-air updates. Dyness lists CE-EMC, CE-RED, IEC 62619, IEC 63056, IEC 62477, IEC 62040, UN38.3 and VDE 2510 for STACK100 Pro, a cycle life of at least 8,000 cycles and a 10-year warranty.
Same 5.12kWh module rating and 3–15 module clusters, but STACK100 Pro has an IP66 housing with natural cooling and may be installed outdoors, while STACK100 is IP20, fan-cooled and indoor only. Modules and controllers of the two series are different products.
Only with the optional heating function, which extends the charge range to -20°C. Without it, charging is allowed from 0°C to +55°C; discharge works from -20°C to +55°C.
Up to 15 modules per cluster (76.8kWh) and 12 clusters in parallel, which Dyness gives as up to 921kWh.
One SBDU100 Pro control unit, one base and at least three S51100 Pro modules. Expansion above eight modules is normally split into two columns.

Dyness
40A
38 available

Dyness
100A
13 available

Dyness
200A
21 available

Redarc
100A12V
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.