
Dyness
Tower Pro BDU + base
40A
38 available

Dyness · BMS and protection
100A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Dyness products with the full manufacturer's warranty and all their documentation.
SBDU100 is the control unit that sits on top of every Dyness STACK100 cluster, supplied here together with the base the S51100 modules stand on. It runs a cluster of three to fifteen 5.12kWh modules in series, 15.36 to 76.8kWh, across 134.4–864V with up to 100A continuous current. Its sides carry the DC breaker, the power-on switch and wake button, the DC sockets for the inverter, two CAN/RS485 ports, parallel in/out ports for up to 12 clusters and the Wi-Fi module for the Dyness app with over-the-air updates. The SBDU100 measures 590×390×133mm and weighs 15.3kg; the base is 100mm high and brings the pair to 22kg. IP20: indoor installation only. Modules are sold separately.
STACK100 builds a high-voltage battery from 51.2V, 100Ah lithium iron phosphate modules stacked in series on a base, with the SBDU100 control unit on top. Three to fifteen S51100 modules make one cluster of 15.36kWh to 76.8kWh, operating between 134.4V and 864V. The modules plug into each other without cables, and Dyness quotes about 30 minutes to install one cluster. Each module is 590×390×133mm and weighs 47kg; the SBDU100 adds 133mm and 15.3kg and the base 6.7kg.
The recommended rate is 0.5C (50A, 2.56kW per module) and the maximum is 1C (100A, 5.12kW per module), with 125A for two minutes at 25°C. Usable energy is 95% of nominal, 4.864kWh per module. Dyness rates at least 8,000 cycles at 0.2C and 25°C to 70% end of life. An aerosol fire extinguisher is built in, the cluster is cooled by fans, and modules of different ages can be mixed within three years. An optional heating function extends charging down to -20°C.
STACK100 is IP20 and must be installed indoors, away from flammable materials. The manual asks for 500mm from other equipment or batteries and 30mm from the wall; when running at 0.5C or more in a room without temperature control, keep more than 300mm between the fan side and another cluster. More than twelve modules should be split into two columns. Up to 12 clusters can be paralleled when their voltages are within 20V, all are fully charged and the newest is less than three years younger.
The datasheet lists compatible inverters from KOSTAL, Ingeteam, Solis, GoodWe, Solplanet, SAJ, Deye, Hoymiles and Solinteg, among others. For parallel clusters only the cable labelled CAN may be used. Clusters connect to the inverter over CAN or RS485; the battery is supplied with one cable labelled RS485 for KOSTAL inverters and one labelled CAN for the other listed brands.
The SBDU100 has a built-in Wi-Fi module for the Dyness app, including over-the-air updates. The datasheet lists CE-EMC, CE-RED, IEC 62619, IEC 63056, IEC 62477, IEC 62040, UN38.3, VDE 2510, CEI 0-21 and CEI 0-16, and the EU declaration of conformity covers the heated S51100 and SBDU100 versions. Noise is up to 55dB.
Between 3 and 15 modules, i.e. 15.36kWh to 76.8kWh. Above twelve modules Dyness recommends installing them in two columns.
No. STACK100 is IP20 and the manual requires indoor installation. For outdoor locations Dyness offers the IP66 STACK100 Pro.
Up to 12 clusters of up to 15 modules in parallel, 921.6kWh in total. Clusters must be within 20V of each other and fully charged when connected.
Each cluster needs one SBDU100 control unit and a base. The inverter must be a high-voltage hybrid model approved by Dyness for the cluster voltage.

Dyness
40A
38 available

Dyness
100A
77 available

Dyness
200A
21 available

Redarc
100A12V
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.