
Dyness
Tower Pro BDU + base
40A
38 available

Dyness · BMS and protection
200A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Dyness products with the full manufacturer's warranty and all their documentation.
SBDU200 is the control unit of the Dyness STACK280, supplied with the base for the S51280 modules. It runs three to fifteen 14.336kWh modules of 280Ah in series, 43 to 215.04kWh between 134.4 and 864V, with up to 200A continuous current (0.7C). The unit connects the cluster to the inverter over CAN or RS485, has a Wi-Fi module for the Dyness app with over-the-air updates and handles up to 12 clusters in parallel. The SBDU200 measures 770×425×230mm and weighs 19.2kg; base and control unit together weigh 38kg and add 363mm to the column. One column takes up to eight modules, larger clusters are split in two with the expansion base. IP20, indoor installation; modules are sold separately.
STACK280 is the larger sibling of STACK100, using 280Ah lithium iron phosphate cells. Each S51280 module has 16 cells for 51.2V and 14.336kWh, of which 13.619kWh is usable at 95% depth of discharge. Three to fifteen modules are stacked on a base under the SBDU200 control unit, forming clusters of 43kWh to 215.04kWh that operate between 134.4V and 864V. Power and signal connect through the stack itself, without cables between modules.
The recommended rate is 0.5C (140A, 7.168kW per module) and the maximum continuous rate 0.7C (200A, 10.24kW per module), with 280A for two minutes at 25°C. Each module carries its own aerosol extinguisher, which Dyness says acts within five seconds, and the system is fan-cooled. Dyness rates at least 8,000 cycles at 0.2C and 25°C to 70% end of life and gives a 10-year warranty. Heating for charging from -20°C is available as an option.
STACK280 is IP20 and goes indoors. Modules weigh 110kg each, so the manual asks for at least two people and preferably a crane, and for a check of floor loading on upper storeys. One column of eight modules plus the SBDU200 is about 2,208mm high and needs 450mm free above it; larger clusters are split into two columns with an expansion base.
Up to 12 clusters run in parallel if their voltages are within 20V, all are fully charged and they are less than three years apart in age. Dyness lists Solis, Sosen, Solinteg, ATESS, Megarevo and Deye among compatible inverter brands.
The control unit has a built-in Wi-Fi module for the Dyness app and over-the-air updates, and talks to the inverter over CAN or RS485. For parallel clusters, only the cable labelled CAN may be used for communication. Datasheet certifications are UN38.3, CE-EMC and IEC 62619.
One cluster holds 3 to 15 modules, 43kWh to 215.04kWh. Up to 12 clusters can be paralleled, about 2.58MWh in total.
Each S51280 module weighs 110kg; the datasheet gives the cluster weight as 38kg plus 110kg per module, so a three-module cluster is about 368kg. Floor loading must be checked, especially on upper floors.
Yes, heating is an option. With it the charge range extends to -20°C; without it charging is allowed from 0°C. Discharge works from -20°C.
Up to 200A continuous (10.24kW) and 280A for two minutes at 25°C. The recommended operating point is 140A, 7.168kW per module.

Dyness
40A
38 available

Dyness
100A
13 available

Dyness
100A
77 available

Redarc
100A12V
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.