Anker SOLIX Solarbank 3 E2700 Pro2.688kWh all-in-one plug-in PV storage, 4 MPPT, 3,600W PV input

Overview

The Solarbank 3 E2700 Pro is Anker SOLIX's all-in-one storage unit for balcony and small roof PV: a 2,688Wh LFP battery, four MPPT inputs taking 900W each and a bidirectional inverter in one 29.2kg, IP65 housing. It feeds 800W or 1,200W into the home depending on version, charges from the grid at 1,200W and runs a 1,200W off-grid socket during outages. Up to five BP2700 packs raise storage to 16,128Wh. This listing is the main unit alone; the Anker SOLIX Smart Meter is sold separately.

• 2.688kWh LFP base unit, up to 16.128kWh
• Four MPPT inputs, 900W each, 3,600W total
• 800W or 1,200W grid output, 1,200W AC charging
• 1,200W off-grid socket with 2,000W bypass
• IP65, -20…+55°C, 10-year warranty
• VDE-AR-N 4105 and Austrian TOR Type A certificates

How it works

The Solarbank 3 E2700 Pro combines solar charge controllers, a 25.6V LFP battery and an isolated bidirectional inverter in a single 29.2kg housing. Panels connect directly to four MPPT ports, the battery stores surplus energy and the inverter feeds the home through the on-grid terminal. Because the inverter also charges from the grid at up to 1,200W, the unit can buy energy during cheap tariff hours and release it at peak times.

Capacity grows by stacking up to five BP2700 expansion batteries under the main unit, from 2,688Wh to 16,128Wh. BP2700 packs share the 25.6V, 105Ah cell format of the base unit, so no separate controller is needed. Older BP1600 packs can be mixed in; in that case Anker limits combined expansion-battery charging to 2,000W, compared with 3,600W when only BP2700 packs are fitted.

Key features

Each MPPT port accepts 16–60V and up to 32A, with a 900W limit per port. Panels must never be wired in series, because two modules exceed the 60V input limit; instead Y-cables allow two modules in parallel per port, up to eight in total. The unit has an off-grid socket rated 1,200W that keeps essential loads running during an outage, with up to 2,000W bypass from the grid in normal operation.

Installation and compatibility

The base unit measures 460×254×279mm and each BP2700 460×233×217.5mm. Packs stand on the floor with the heat sink facing the wall at 18–47mm, and the supplied L-brackets anchor the stack to the wall. Anker specifies tinned or bare copper PV cable in XLPO or XLPE, 4mm² up to 25A and 6mm² from 25 to 36A. The grid connection uses a 3m Schuko cable, and the earth of the socket must be sound.

Anker publishes an NA-protection certificate to VDE-AR-N 4105 for Germany, a TOR Erzeuger Type A certificate for Austria and CE declarations to EN 62109-1/-2. Rules for plug-in storage differ between countries, so check registration and the permitted feed-in power with the local grid operator before installation.

Monitoring and settings

Setup and monitoring run in the Anker app over Wi-Fi 2.4GHz and Bluetooth. Self-consumption mode and the AI-based smart mode need an Anker SOLIX Smart Meter to measure the household's grid connection; if the meter goes offline the unit falls back to custom mode. A time-schedule mode, manual backup reserve and smart-plug control for surplus energy complete the options.

Questions and answers