V-TAC VT48100E-P2 5.12kWh battery with rack cabinet5.12kWh 51.2V LiFePO4 rack module supplied with cabinet module and cover

Overview

This set pairs the VT48100E-P2 5.12kWh, 51.2V lithium iron phosphate rack module with a rack cabinet module and top cover, so a single battery can be installed tidily without a separate 19-inch cabinet. The battery itself delivers up to 100A continuous, communicates with the inverter over CAN or RS485 and allows up to six modules in parallel for about 30kWh. Install it indoors, as the module is IP20.

• 5.12kWh, 51.2V, 100Ah LiFePO4 rack module
• 100A maximum continuous charge and discharge
• 19-inch rack format, 445×400×130mm, 41kg
• CAN and RS485 BMS with LCD and DIP addressing
• Up to 6 modules without a control unit
• IEC 62619 certified, EMC 2014/30/EU

How it works

The VT48100E-P2 holds 16 lithium iron phosphate cells in series for 51.2V nominal and 100Ah, or 5.12kWh. Its BMS protects against overcharge, overdischarge, overcurrent and temperature faults, balances the cells and passes state of charge and limits to the inverter over CAN or RS485. V-TAC gives a 56.8V maximum charge voltage, 20A standard and 100A maximum continuous current at 25°C, a recommended depth of discharge above 80% and more than 6,000 cycles below 0.5C.

Installation

The module is built for standard 19-inch racks and cabinets and is IP20, so it belongs in a dry indoor room; V-TAC recommends 10–45°C for best life, while the BMS allows charging from 0°C and discharging from -20°C up to +60°C. Each module has a front LCD, power terminals, two RJ45 communication ports and a DIP switch for the address. Self-discharge stays below 3% per month, but packs should not be stored empty.

Parallel systems and compatibility

Up to six modules work in parallel without a control unit, which V-TAC puts at about 30kWh; with a control unit, communication extends to 15 modules. With four to six modules the bank current is limited to 300A, so peak power stays at about 15kW. For CAN set the master to address 0 and number the others upwards.

V-TAC's 51.2V compatibility list covers Deye LV hybrids plus Solis, Hoymiles, Afore, SRNE, TBB, Megarevo, INVT, Vestwoods, Phocos Any-Grid and Victron GX devices, mostly over CAN, and Deye's CEI 0-21 declaration for SG03LP1 inverters lists the VT48100E-P2 with one to 15 modules. The same module is also offered as a set with a rack cabinet module and top cover for installations without a 19-inch cabinet.

Questions and answers