Solis solar kit 9.60kWp with 15.36kWh storage – 6kW three-phase high-voltage hybrid inverter, Pylontech Force H39.60kWp three-phase kit with 6kW Solis high-voltage hybrid inverter and 15.36kWh Pylontech Force H3 storage

Overview

Nineteen 505Wp modules (9.595kWp) with a 6kW Solis three-phase hybrid inverter for high-voltage batteries and a 15.36kWh Pylontech Force H3 tower of three FH10050 modules. Pylontech rates the tower for 50A of charge and discharge current, 95% depth of discharge and more than 8,000 cycles at 25°C, with a design life above 15 years. The complete tower weighs 131kg and stands on a base fixed to the floor or held by anti-toppling brackets. DC and AC protection is supplied in a protection box.

• Solis three-phase high-voltage hybrid inverters, 5–50kW
• Pylontech Force H3 tower of 5.12kWh FH10050 modules
• 15.36kWh or 30.72kWh, up to seven modules per tower
• Battery rated 50A, 95% DoD, over 8,000 cycles
• Force-H3 on the Solis battery matching list
• PV arrays within Solis' usable PV limit

What's in the kit

• 1 × Solis Three-phase high-voltage hybrid inverter 6kW (model not specified)
• 19 × 505Wp PV module
• 1 × Pylontech Force H3 15.36kWh (FC1000 controller with 3 × FH10050)
• 1 × DC and AC protection box

How the kits work

Each kit pairs a Solis three-phase hybrid inverter for high-voltage batteries with a Pylontech Force H3 tower and a PV array sized within Solis' usable PV limit. The tower stacks 5.12kWh FH10050 modules in series under an FC1000 controller, so three modules give 15.36kWh at 307.2V and six give 30.72kWh at 614.4V. The inverter charges the tower from PV or grid, discharges it into the building in the evening and exports or limits the remaining surplus.

Inverter options

The 18.18kWp and 24.24kWp kits use the S6-EH3P15K-H or 20K-H, with four MPP trackers, a 120–800V battery port and 50A of battery current. The 35.4kWp to 61.36kWp kits use the S6-EH3P30K, 40K or 50K-H, whose two battery ports each take 70A between 150V and 800V and can be combined on one battery. The smaller kits, from 5 to 12kW, pair the same tower with a Solis three-phase high-voltage hybrid of matching rating.

Battery and compatibility

Pylontech rates Force H3 for 50A of charge and discharge current, 55A for 15 minutes, 95% depth of discharge and more than 8,000 cycles. At nominal voltage a three-module tower therefore handles about 15kW and a six-module tower about 31kW. Pylontech's high-voltage compatibility list allows two to five FH3 modules with the S6-EH3P(5-10)K-H-EU and two to seven with the S6-EH3P(12-20)K-H and S6-EH3P(29.9-50)K-H, and Solis includes Force-H3 in its battery matching list.

Installation and what to add

The S6-EH3P-H inverters are IP66. The Force H3 system is rated IP65, yet Pylontech asks to avoid direct sun and frost and to keep the base out of rain. A three-module tower weighs 131kg and a six-module tower 248kg; the base is fixed with M8 expansion bolts or anti-toppling brackets, with 0.3m between towers. Solis publishes a CEI 0-21 declaration for each inverter series with an appendix of approved batteries. The installer adds mounting, DC and AC protections, cabling and the grid paperwork.

Questions and answers