Solis S6-GC110K110kW three-phase grid-tied string inverter, 10 MPPT

Overview

The S6-GC110K is the 110kW member of the Solis S6-GC(80-125)K series, intended for large commercial roofs and ground-mounted arrays. Twenty strings connect to ten MPP trackers, rated alternately 42A and 36A, which leaves headroom for high-current modules; the window runs from 160V to 1000V. Output reaches 121kVA, 183.8A per phase, at 98.7% peak efficiency. It shares the 1014×567×345mm, 96kg housing of the 100kW and 125kW models, and Solis specifies a 250A AC protection device.

• 80, 100, 110 and 125kW, 3/N/PE 380/400V
• 8 MPPT (80kW) or 10 MPPT (100–125kW)
• 42A/36A per tracker, 1100V max. input
• Max. efficiency 98.7%, EU 98.3%
• String monitoring, I-V scan, night SVG
• IP66, OT terminals up to 240mm²

How it works

The S6-GC(80-125)K is a transformerless three-phase string inverter for commercial and industrial PV systems. The 80kW model has eight MPP trackers, the 100kW, 110kW and 125kW models ten, each with two strings; trackers alternate between 42A and 36A input current, so high-current bifacial modules can be connected. The MPPT range is 160–1000V with a maximum input of 1100V and a start-up voltage of 180V.

Maximum AC output is 10% above rated power on the 80–110kW models and equal to rated power on the 125kW model, with 98.7% peak and 98.3% European efficiency. The grid connection is 3/N/PE at 220/380V or 230/400V, 50Hz or 60Hz, and night-time self-consumption stays below 2W.

Key features

Every string is monitored and an I-V curve scan helps locate faulty modules. A night SVG function provides reactive power when there is no PV production, and AFCI 2.0, PID recovery, an AC switch and an integrated export power manager for up to 10 inverters are available as options. Solis also lists real-time PV grounding detection and optional coordination of arc detection with module-level rapid shutdown.

A master-slave export control limits feed-in across up to 10 inverters, and an optional unbalanced export control assigns power per phase. Solis states that single and multiple generator sets can be supported without an external genset controller. The datasheet also lists support for meteorological equipment and a warning function for low system efficiency.

Installation and compatibility

The IP66 housing measures 1014×567×345mm and weighs 93kg or 96kg, with intelligent fan cooling and an operating range of -30…+60°C. Solis asks for 500mm between inverters and from the ground. AC cables of 50–240mm², copper or aluminium with suitable transfer terminals, connect to OT terminals; the manual specifies a 200A protection device for the 80kW and 100kW models and 250A for the 110kW and 125kW models.

Grid connection standards in the datasheet are G99, IEC 61727, EN 50549-1/-2 and VDE-AR-N 4110. For Italy, Solis publishes CEI 0-21 and CEI 0-16 declarations and certificates for the S6-GC(80-125)K, and an EN 50549-2 certificate and EU declaration of conformity are available from the Solis download area.

Monitoring and settings

Local settings are made on the LCD display. Two independent RS485 ports allow a Solis data logger and third-party SCADA or energy management to be connected at the same time, and Wi-Fi, GPRS or PLC communication is optional. Remote monitoring and firmware updates run through SolisCloud, and the manual describes the external EPM and unbalanced export control settings.

Questions and answers