
Solis
S6-EH3P8K02-NV-YD-L
8kWThree-phase48V
18 available


Solis · Hybrid inverter
18kWThree-phase48V
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Solis products with the full manufacturer's warranty and all their documentation.
The S6-EH3P18K02-NV-YD-L is the 18kW model and the top of the S6-EH3P(8-18)K02-NV-YD-L series. It charges and discharges at up to 320A on a 48V battery, with 175A per battery port, and its two MPP trackers take 42A each on four strings, with up to 21A per string. Solis recommends up to 36kW of PV, of which 28.8kW is usable. The backup port delivers 18kW and twice that for 10 seconds, with each phase limited to 40% of rated power. A three-phase generator up to 18kW can be connected.
The S6-EH3P(8-18)K02-NV-YD-L is a three-phase hybrid inverter that Solis designed for larger residential storage systems with low-voltage 48V batteries. It combines a PV input with two MPP trackers, a battery input for lithium or lead-acid batteries from 40V to 60V, a grid port, a backup port and a generator port. Charge and discharge current reaches 180A on the 8kW model, 290A on the 15kW model and 320A on the 18kW model, spread over two battery terminal pairs.
The PV side accepts up to 1000V and tracks from 200V to 850V. On the 8–12kW models one tracker takes 20A and the other 40A with two strings; on the 15kW model both take 40A and on the 18kW model 42A. Solis recommends PV arrays of up to twice the AC rating, of which 1.6 times is usable.
When the grid fails, the backup port switches over in under 10ms and can deliver twice rated power for 10 seconds, which helps with motor, pump and air-conditioner start-up. Each phase can supply up to 50% of rated power (40% on the 18kW model), so unbalanced loads are supported. The AC pass-through current from grid to backup port is 50A.
The generator port accepts a three-phase generator up to the inverter rating, an existing grid-tied PV inverter in AC-coupled mode, or non-critical smart loads switched by battery state of charge. In parallel systems Solis recommends connecting a generator through an ATS. PV-only off-grid operation without a battery is also possible.
The inverter weighs 42kg, measures 430×660×305mm and is fan-cooled. Keep at least 300mm to other objects and 700mm between inverters. Battery cables connect with M8 screws to two BAT+ and two BAT- inputs; the datasheet allows 150A per port on the 8–15kW models and 175A on the 18kW model. Lead-acid batteries need the temperature sensor connected to the BMS port.
Up to six inverters of the same model can run in parallel and share one battery system, with the BMS connected to the master. Only batteries on the Solis matching list are supported. The Italian CEI 0-21 declaration for the 8–15kW models lists combinations with SolisStorage FlexHome-L and IntelliHome-OD, Dyness, WECO, Steltec and Vestwoods batteries.
Local operation uses the 7in LCD display or Bluetooth with the SolisCloud app. Ethernet is built in and an S2-WL-ST Wi-Fi stick is supplied, with cellular or LAN loggers as options; in parallel systems each inverter needs a logger for remote upgrades. An Eastron SDM630MCT meter with CTs is included; for the 18kW model Solis supplies either three CTs or the meter, depending on the configuration ordered. AFCI 2.0 and DC/AC type II surge protection are optional.
Yes. The battery input accepts lithium and lead-acid batteries from 40V to 60V. With lead-acid, the battery temperature sensor must be connected to the inverter's BMS port.
Yes. Up to six inverters of the same model can run in parallel and share one battery system, with the battery BMS connected to the master inverter. Models of different power cannot be paralleled.
The inverter charges and discharges at up to 180A (8kW), 220A (10kW), 250A (12kW), 290A (15kW) or 320A (18kW). Check that the chosen battery bank and cabling can handle the current you plan to use.
Yes. Solis publishes a CEI 0-21 declaration for S6-EH3P(8-15)K02-NV-YD-L with an appendix of approved storage systems, including SolisStorage FlexHome-L and IntelliHome-OD batteries. The 18kW datasheet also lists CEI 0-21 among its grid standards.

Solis
8kWThree-phase48V
18 available

Solis
10kWThree-phase48V
81 available

Solis
12kWThree-phase48V
33 available

Solis
15kWThree-phase48V
9 available

Deye
18kWThree-phase48V
Available — quantity not tracked

Solis
20kWThree-phaseHV
32 available

Deye
20kWThree-phase48V
Available — quantity not tracked

Deye
20kWThree-phaseHV
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.