SolaX X3-HYB-6.0-P 6kW three-phase hybrid inverter (G4 PRO)6kW three-phase hybrid inverter, 2 MPPT, two battery ports

Overview

The X3-HYB-6.0-P delivers 6000W rated and 6600VA maximum output on a three-phase grid, from two MPP trackers rated 20A each with up to 12kWp of PV recommended. Its two battery ports accept separate SolaX high-voltage clusters at 25A each, or one battery at 30A, or 50A with a splitter cable. EPS backup supplies 6kVA, twice that for 10 seconds, with switch-over in under 10ms.

• 4–15kW; 2 MPPT up to 6kW, 3 MPPT from 8kW
• 20A per MPPT, 110–950V operating range
• Two battery ports, 120–800V, up to 50A combined
• EPS under 10ms, 200% peak for 10s
• Parallel up to 10 units with X3-PBOX-150kW-G2
• IP66, CEI 0-21, CEI 0-16, VDE-AR-N 4105

How it works

The X3-HYB G4 PRO links PV, high-voltage batteries and the three-phase grid. It has two independent battery terminals, so two battery clusters can be connected, each limited to 25A when both are used, or a single cluster on one terminal at 30A. With a 2-in-1 splitter cable, sold separately, one battery can use both ports for 50A. Battery voltage must be 120–800V per terminal.

Operating modes include Self-use, Feed-in Priority, Backup, Peak Shaving, TOU, EPS and Manual, plus microgrid and generator operation. During a grid failure the EPS output takes over in less than 10ms and can supply twice its rated power for 10 seconds. Up to three units run in parallel without accessories and up to ten with an X3-PBOX-150kW-G2.

Key features

The 4, 5 and 6kW models have two MPP trackers, the 8–15kW models three, each taking one string at 20A and 25A short-circuit current. The operating range is 110–950V with 1000V maximum and 120V start-up, and SolaX permits PV arrays of twice the rated power and AC output up to 110%. Maximum efficiency is 98.0% and European efficiency 97.7%.

Optional functions include rapid shutdown and arc-fault protection (AFCI); Type II surge protection is fitted on both AC and DC sides. The inverter supports wireless meters, smart schedules and scenes, 24-hour time-of-use control and VPP protocols. The 4–10kW models are naturally cooled, the 12 and 15kW models use smart fan cooling.

Installation and compatibility

The IP66 housing measures 560×503×210mm and weighs 38kg, with a wiring cover and additional ports to simplify installation; it works from -35°C to +60°C with derating above 45°C. The manual lists T-BAT-SYS-HV-3.0 and T58 or T58 V2 with 2–4 modules per battery terminal, T-BAT-SYS-HV-S50E-D and T58 V3 with 2–6, and the S25, S36 and S51 systems with 3–13.

Grid certifications include VDE 0126-1-1, VDE-AR-N 4105, G98, G99, AS 4777, EN 50549 and CEI 0-21, with safety to IEC 62109-1 and -2. SolaX publishes CEI 0-21 and CEI 0-16 certificates for the X3-HYB G4 PRO; the CEI 0-21 certificate includes configurations with T-BAT H V3 batteries for Italian low-voltage connections.

Monitoring and settings

Commissioning and settings are available on the inverter and in the SolaX app, and SolaXCloud provides monitoring and remote updates through a SolaX monitoring dongle. Interfaces are RS485, CAN, DRM and digital inputs and outputs. Night-time consumption is below 5W.

Questions and answers