SolaX solar kit 35.4kWp – X3-ULT-30K 30kW three-phase hybrid inverter, battery-ready35.4kWp PV kit with 30kW three-phase high-voltage hybrid inverter, no battery

Overview

60 modules of 590Wp (35.4kWp) with the SolaX X3-ULT-30K, the 30kW top model of the X3-ULTRA three-phase hybrid range. Three MPPTs take two strings each at up to 36A and SolaX recommends up to 60kWp, leaving room to extend the array. The inverter accepts high-voltage storage at 120–800V on two 30A battery inputs and can run in parallel with up to nine more units for larger sites.

• SolaX X3-HYBRID-12.0-D, X3-ULT-20K or X3-ULT-30K
• Battery not included; 120–800V high-voltage battery input
• Up to 200% PV oversizing per SolaX datasheets
• UPS-level backup switch-over under 10ms
• Up to 10 units in parallel on-grid and off-grid
• CEI 0-21, EN 50549 and VDE 4105 listed

What's in the kit

• 1 × SolaX X3-ULT-30K
• 60 × 590Wp PV module

How the kits work

Each kit combines a SolaX three-phase hybrid inverter with a set of PV modules and leaves the battery out, so the system starts as a grid-connected plant and storage can be added later. Both inverter series take high-voltage lithium batteries in the 120–800V range. SolaX notes that the X3-HYBRID G4 is compatible with a minimum of three HS25/HS36 battery modules and the X3-ULTRA with a minimum of three HS series modules.

Inverter options

The X3-HYBRID-12.0-D (G4) delivers 12kW, accepts up to 24kWp of PV on two MPPTs (28A and 16A) and charges the battery at 30A. The X3-ULTRA models are larger commercial units: the X3-ULT-20K has two MPPTs and the X3-ULT-30K three, each taking two strings at up to 36A, with 60A of battery current on two battery inputs of 30A. SolaX quotes 98.0% maximum and 97.7% European efficiency for both series.

Backup and energy management

Backup (EPS) output switches over in under 10ms and supplies twice its rated power for 10 seconds on the X3-ULTRA. SolaX lists smart load management for heat pumps and EV chargers, time-of-use energy management on the G4, and on-grid and off-grid parallel operation: up to 10 units for the X3-ULTRA, up to 150kW for the G4. A Super-Backup setting, disabled by default, lets the X3-HYBRID G4 enter off-grid mode with PV input only; without battery, the manual limits three-phase EPS output to half its nominal value.

Installation and what to add

The X3-HYBRID G4 is IP65 and the X3-ULTRA IP66, both rated -35…+60°C with derating above 45°C and up to 3000m altitude. Type II surge protection is fitted on DC and AC, AFCI is optional. The installer adds mounting structures, DC and AC cabling and protections, the CT or meter used for export control, the monitoring dongle where not supplied, the grid connection paperwork and, later, the battery.

Questions and answers