Pytes E-BOX 48100R TE+5.12kWh 51.2V rack-mount LFP battery module, TE+ version

Overview

The TE+ is a version of the Pytes E-BOX 48100R rack battery, documented in its own Pytes datasheet with the same ratings as the standard module: 51.2V, 100Ah, 5.12kWh, 50A (2.56kW) continuous and 102A for 15 seconds, in a 2.6U case of 440×620×117mm and 51kg. It suits indoor racks and cabinets on low-voltage hybrid or off-grid inverters. The 2025 E-BOX manual allows 16 modules per group only for units with the C16 label on carton and serial number; others stop at eight.

• 51.2V, 100Ah, 5.12kWh, 4.608kWh usable
• 50A continuous, 102A peak for 15 seconds
• 2.6U case for 19-inch racks, 51kg
• 16 per group, up to 491.52kWh with a hub
• ≥6,000 cycles at 90% DoD, 10-year warranty
• CAN and RS485 closed-loop communication

How it works

The E-BOX 48100R is a self-contained low-voltage battery: lithium iron phosphate cells, a Pytes battery management system and a metal case of 440×620×117mm that takes 2.6U in a 19-inch rack. Each module stores 5.12kWh at 51.2V, of which 4.608kWh is usable. Modules are only ever connected in parallel, so the bank stays at 47.5–57.6V while capacity grows. One module acts as master towards the inverter and the others follow it through the link ports.

Key features

Charge and discharge are rated at 50A (2.56kW) per module, with a 102A peak for 15 seconds (5.22kW). The per-module current stays the same however many units are paralleled, and Pytes asks for a busbar when the bank must carry more than 100A. Cycle life is at least 6,000 cycles at 0.5C, 25°C and 90% depth of discharge, round-trip efficiency at least 95%. The datasheet lists UL 9540, UL 9540A, UL 1973, CEC, SGIP, CE, IEC 62619 and UN38.3.

Installation and compatibility

The pack can lie in a 19-inch cabinet or stand on its side. Pytes offers the E BK1 floor bracket (up to six stacked), the R-BOX and R-BOX-NEMA3 for two modules, the IP55 R-BOX-OC for four and the Forest RB Plus cabinet for six. The case itself is IP20: install it in a closed room or cabinet at -10…+50°C, 20–80% humidity, below 4,000m and with a 5cm cooling gap. Series connection is forbidden.

Up to 16 modules form one group of 81.92kWh, and six groups can be joined through a Pytes hub for 491.52kWh. The 2025 manual adds that only units carrying the C16 label on carton and serial number accept 16 in parallel; others are limited to eight. A DC breaker rated at least 60V should sit between battery bank and inverter.

Monitoring and settings

Each module has CAN and RS485 ports for the inverter, two RJ45 link ports for the cascade between modules and an RS232 port for PC software and firmware updates. A DIP switch on the master selects the inverter protocol. Six green LEDs show state of charge in 16.7% steps, next to run and alarm lights. Pytes specifies a charging voltage of 57.5V ±0.1V and asks for all batteries to be switched on before the inverter.

Questions and answers