
Felicity Solar
FLH48100R9G1/G2
Floor-standing rack for one control module and up to 8 FLH48100 battery modules
Available — quantity not tracked

Felicity Solar · System accessory
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Felicity Solar products with the full manufacturer's warranty and all their documentation.
The FLH48100R13 is the 13-level floor-standing rack of the Felicitysolar FLH48100 high-voltage battery system. The top level takes the control module and the twelve levels below take 5.12kWh, 51.2V battery modules: the maximum of a first-generation (G1) cluster, 61.44kWh, or twelve of the up to sixteen modules of a G2 cluster. Felicitysolar specifies a 13-level rack for each generation: the R13G2 measures 590×532×2087.5mm and weighs 49kg, the R13G1 560×590×2137.5mm and 62kg. Battery modules and control module are ordered separately, and since the modules are rated IP21 the rack belongs in a dry indoor room.
An FLH48100 cluster is a column of 51.2V, 100Ah LiFePO4 modules connected in series under a high-voltage control module, all housed in a dedicated rack. Each module adds 5.12kWh and 51.2V, so system voltage rises with the number of modules. The control module contains the BMS master, breaker, LCD touch screen and inverter connection; Felicitysolar specifies the G1 control box at 720V and 100A.
Two generations are offered. G1 uses the FLH48100UCG1 control module with FLH48100UMG1 modules, four to twelve per system (20.48–61.44kWh, 204.8–614.4V). G2 uses the FLH48100UCG2 with FLH48100UMG2 modules, five to sixteen per cluster (25.6–81.92kWh), with up to 16 clusters in parallel, module-level balancing that allows new and old modules to be mixed and an aerosol fire extinguisher in every module.
Recommended charge and discharge current is 50A and the continuous maximum 100A, with 120A for 15s on G1. Cycle life is rated at 6,000 cycles or more. Depth of discharge is at least 95% on G1 and 90% on G2. Protection covers internal short circuit, over- and undervoltage, overcurrent and overtemperature on the battery side, and overvoltage, overcurrent, short circuit, reverse polarity, ground fault and inrush current on the inverter interface (G1 manual).
Modules are designed for rack mounting. For G1 the 13-level rack FLH48100R13G1 holds one control module and up to twelve modules and the 9-level FLH48100R9G1 up to eight; G2 has matching R13G2 and R9G2 racks. Modules are rated IP21, so the system belongs indoors, with charging from 0°C to 55°C and discharging from -20°C to 55°C, below 2000m.
The battery communicates with the inverter over RS485 or CAN, and the operating voltage of the chosen module count must fit the inverter battery input. Felicitysolar pairs the G2 system with its 50kW IVGM50KHP3G2 hybrid inverter and FLH-E60 cabinet in published system datasheets.
Parameters and working mode are set on the LCD touch screen of the control module, which also shows state of charge and fault codes; the G1 manual describes DIP switches for addressing parallel systems. G2 adds Wi-Fi, Bluetooth and USB for configuration and monitoring, and the data can be viewed in the Fsolar app.
No information in the official documents supports mixing generations. G1 modules work with the FLH48100UCG1 control module and G2 modules with the FLH48100UCG2.
Four FLH48100UMG1 modules (20.48kWh) for G1, five FLH48100UMG2 modules (25.6kWh) for G2.
No. The racks are separate products: 13-level and 9-level versions for each generation.
Yes. The G2 BMS balances at module level and supports mixing new and old modules, and up to 16 clusters can run in parallel.

Dekalin
Primer for MS polymer adhesives on smooth and plastic surfaces
Available — quantity not tracked

Redarc
175mm stainless steel resistive tank level sensor for TVMS Rogue
Available — quantity not tracked

Redarc
200mm stainless steel resistive tank level sensor for TVMS Rogue
Available — quantity not tracked

Redarc
225mm stainless steel resistive tank level sensor for TVMS Rogue
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.