Envertech EVT500-R500W single-phase microinverter for 1 PV module, chainable R version

Overview

The EVT500-R is Envertech's single-module microinverter in the chainable R version. It takes one PV module of 250W to 650W+ on a single MPP tracker, at up to 18A and 60V, and delivers 500W continuous at 2.27A into a 220/230V single-phase supply with 96.5% peak efficiency. Up to ten units can share a 12AWG branch through the hand-in-hand AC connectors, so each module on an irregular or partly shaded roof gets its own tracker. The IP67 unit weighs 2.1kg and has built-in Wi-Fi.

• One MPPT per module, 22–50V tracking range
• Low DC voltage: 60V maximum input
• Built-in Wi-Fi plus power-line communication
• IP67, -40…+65°C, high-frequency isolated
• 15-year warranty, 5-year extension available
• EN 50549-1 and VDE-AR-N 4105 listed

How it works

An Envertech microinverter sits on the rail beneath the modules and converts their DC output directly into 220/230V single-phase AC. Each module has its own MPP tracker working between 22V and 50V, so shading, soiling or a different orientation on one panel does not pull down the others. DC wiring stays at module level, with 60V as the highest input voltage, instead of a high-voltage string running across the roof.

This range covers three sizes: EVT500 for one module, EVT1000 for two and EVT2000SE for four, each module rated from 250W to 650W+. The housings are IP67, high-frequency isolated, protective class I and specified for full operation from -40°C to +65°C ambient.

B and R versions

Envertech builds the EVT500 and EVT1000 in several connection versions. The B version is meant for single plug-in installations such as balconies and gardens: it needs no end cap and is connected through an extension cable and plug. The R version uses a hand-in-hand AC connection, so several units can be chained on one branch; an end cap closes the unused connector. The EVT2000SE connects through Envertech trunk cables and T-connectors.

Installation and compatibility

The manual asks for the units to be mounted under the modules, sheltered from rain and sun with the LED visible, and for microinverters and modules to be grounded through the mounting bracket. Branch size must follow the datasheet: five EVT1000 R, ten EVT500 R, or two EVT2000SE on a 12AWG branch (three on 10AWG). Check that module Voc stays below 60V and Isc below 25A before connecting.

The datasheets list compliance with EN 50549-1/10, VDE-AR-N 4105, IEC 61727, IEC 62116, NC-RfG, C10/11, TOR and the LVD, EMC and RED directives. Envertech publishes an EN 50549-1 certificate and a VDE-AR-N 4105 certificate covering the EVT500 and EVT1000; grid connection still requires the utility's approval.

Monitoring and warranty

Units with built-in Wi-Fi connect to a 2.4GHz network and are set up in the EnverView app over Bluetooth or the inverter's own hotspot; data then appears in EnverView and on EnvertecPortal. As an alternative, an optional EnverBridge EVB300 gateway reads the inverters over the power line. The standard warranty is 15 years for the microinverter, 3 years for the Wi-Fi module, with a 5-year extension available within two years of installation; registration is needed for the full term.

Questions and answers