Italian company since 2015 · litio.storeGenuine products · Full manufacturer warrantyReal people, real answers · Quote within 1–2 working days

Deye · BMS and protection

Deye GB-W-PDU-2 control boxHigh-voltage PDU for GB-W clusters, 200–1000V DC, 230A

230A

€941.18ex. VATIndicative price · shipping excluded, by pallet
See the shipping cost

Batteries and inverters travel on a pallet with a freight carrier. The cost depends on the country and on the total weight of the order, excluding VAT.

Package weight: 25.3kg

CountryHalf pallet, up to 500kgFull pallet, up to 750kg
Austria€230.00€320.00
Belgium€230.00€320.00
Bulgaria€320.00€410.00
Croatia€320.00€410.00
CyprusOn request
Czechia€230.00€320.00
Denmark€230.00€320.00
Estonia€320.00€410.00
Finland€320.00€410.00
France€230.00€320.00
Germany€230.00€320.00
Greece€320.00€410.00
Hungary€320.00€410.00
Ireland€320.00€410.00
Italy€230.00€320.00
Latvia€320.00€329.24
Lithuania€320.00€410.00
Luxembourg€230.00€320.00
MaltaOn request
Netherlands€230.00€320.00
Poland€230.00€320.00
Portugal€320.00€410.00
Romania€320.00€410.00
Slovakia€320.00€410.00
Slovenia€320.00€410.00
Spain€230.00€320.00
Sweden€320.00€410.00

Above 750kg the pallets add up: 1,000kg, for example, is one pallet plus a half. In the quote we calculate shipping on the weight of the whole order.

Available — quantity not tracked

Buy now on litio.store

Or add the product to your quote: we reply within 1–2 working days. The button opens your cart on litio.store, our online shop.

How much solar do you need?From consumption to a complete Deye bill of materials in a minute, with your area's yield.Work it out →Configure your system in two minutesPick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and the full bill of materials, ready for your quote.Open the configurator →
How to buy

Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.

Sold by Litio Store SRL

An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.

About us
Genuine product, full manufacturer's warranty

New, genuine Deye products with the full manufacturer's warranty and all their documentation.

Overview

GB-W-PDU-2 is the power distribution unit that tops the first stack of a Deye GB-W commercial battery cluster. It contains the BMS, a circuit breaker and BMS switch, a display for state of charge and error codes, and the P+ and P- terminals and INV/PCS communication port towards the hybrid inverter or PCS. It operates from 200 to 1000V DC with 230A nominal charge and discharge current, enough for clusters of 5 to 16 GB-W-Pack12-2-A3 modules (60–192kWh, 256–819.2V). Bluetooth allows commissioning from the Deye app, a TCP port supports remote monitoring, an EPO input accepts an emergency stop and an external 12V supply keeps the control electronics running during undervoltage. Deye pairs GB-W with its 30–125kW hybrid inverters.

  • 12.03kWh, 235Ah, 51.2V LiFePO4 modules
  • 5–16 modules per cluster: 60.1–192.5kWh
  • 230A continuous, 322A peak for 1 second
  • Natural air cooling, aerosol fire suppression
  • Cable-free stacking with quick connectors
  • ≥6000 cycles, 10-year warranty

How it works

GB-W, marketed as ORION W, is Deye's modular indoor battery for small and medium commercial and industrial sites. The base, GB-W-Pack12-2-A3 modules, GB-W-PDU-2 control unit and top cover are stacked, and modules connect to each other through quick connectors. Each module holds 235Ah at 51.2V, or 12.03kWh, and 5 to 16 modules form one high-voltage cluster in series.

The smallest cluster, GB-W60, runs at 256V and 60.1kWh; GB-W120 with ten modules at 512V and 120.3kWh; GB-W192 with sixteen at 819.2V and 192.5kWh. Charge and discharge current is 230A continuous with 322A for one second, so nominal power grows from 58.8kW to 188.4kW. Deye's brochure gives usable energy at 90% depth of discharge, for example 108.2kWh on GB-W120.

Key features

Cooling is natural, through directional air ducts with dust filters, and Deye states a cell temperature spread below 4°C. Fire protection uses aerosol suppression, and each module has a quick-release service panel so wearing parts can be replaced without removing the module. Deye's declaration under Article 10 of the EU Battery Regulation lists 94% round-trip efficiency and at least 6000 cycles to 70% state of health, and the warranty is 10 years.

Installation and compatibility

GB-W is for indoor use only, on a solid, level floor, at up to 3000m and 0–85% humidity, and its C4 anti-corrosion class allows sites more than 2km from the coast. Leveling feet on the base adjust by up to 40mm. Two or three arrays can stand side by side, joined by a telescopic slide rail that carries power and communication cables. The manual specifies clearances of up to 900mm, so check the drawing during site planning.

Deye designs the system for its 30–125kW three-phase high-voltage hybrid inverters and 100/125kW PCS modules. The PDU connects to the inverter's battery terminals through quick-plug cables, and its INV/PCS port carries CAN or RS485 (Modbus RTU) data. Several clusters can share one inverter through a DC bus, with their PDUs daisy-chained and a terminal resistor at the last PDU.

Monitoring and settings

The PDU has a display, a DC switch and a BMS switch; start-up runs from circuit breaker to BMS switch to inverter. Bluetooth lets the Deye Cloud app commission the system, set parameters and diagnose faults on site, and a TCP port provides remote networking. With a Deye inverter on Wi-Fi or a data collector stick, battery data appear in Deye Cloud under the inverter's architecture page.

Questions and answers

How many modules make a GB-W system?

Between 5 and 16 GB-W-Pack12-2-A3 modules in series per cluster, with one GB-W-PDU-2, a base and a top cover. Five modules give 60.1kWh at 256V and sixteen give 192.5kWh at 819.2V.

Which inverters is GB-W designed for?

Deye states compatibility with its 30–125kW high-voltage hybrid inverters and with the 100/125kW PCS modules of its commercial range.

Does GB-W need air conditioning?

No active cooling is required by design: the system uses natural air cooling with directional ducts and dust filters. It must still be installed indoors within 0–55°C for charging and -20–55°C for discharging.

Can GB-W be installed near the sea?

The anti-corrosion class is C4, and Deye's manual allows installation more than 2km from the coastline, indoors.

You may also like

BMS and protectionDeye AI-W5.1-PDU1-B PDU with base – BMS and protection – photo 1

Deye

AI-W5.1-PDU1-B + base

250A51.2V

from€517.65ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

BMS and protectionDeye GB-LBS-Pro high-voltage control box – BMS and protection – photo 1

Deye

GB-LBS-Pro

50A

from€600.00ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

BMS and protectionDeye BOS-G-PDU-2 control box for BOS-G-Pro – BMS and protection – photo 1

Deye

BOS-G-PDU-2

120A

from€682.35ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

BMS and protectionDeye BOS-B-PDU-2-A control box – BMS and protection – photo 1

Deye

BOS-B-PDU-2-A

180A

from€876.47ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

  • Italian company since 2015Litio Store SRL, Sigillo (Perugia)
  • Genuine productsFull manufacturer warranty
  • Datasheets and manualsFor every product, ready to download
  • Real people, real answersQuote within 1–2 working days

PV Radar

Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.

What would you like to receive?