
Deye
AI-W5.1-PDU1-B + base
250A51.2V
Available — quantity not tracked

Deye · BMS and protection
50A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Deye products with the full manufacturer's warranty and all their documentation.
GB-LBS-Pro is the high-voltage control box that closes the top of every Deye GB-L-Pro battery stack. It houses the battery management system, the high-voltage DC switch, the LCD showing state of charge, power and total voltage, and the power and communication ports towards the inverter. It works from 120 to 750V DC with 40A nominal and 50A maximum charge and discharge current, covering stacks of two to six GB-L-Pro-Pack4.1-2 modules (8–24kWh at 204.8–614.4V). Battery data reach Deye high-voltage hybrid inverters over CAN 2.0 or RS485. The IP65 box weighs about 12kg and is fixed to the wall above the stack. A complete stack also needs one GB-L Base.
GB-L-Pro is a residential high-voltage battery built as a floor-standing stack. A GB-L base carries two to six GB-L-Pro-Pack4.1-2 modules connected in series by plug-in contacts, and the GB-LBS-Pro control box on top holds the BMS, high-voltage DC switch, LCD and the power and communication ports to the inverter. Each module stores 4kWh at 102.4V nominal with 40Ah lithium iron phosphate cells.
With two modules the system is GB-L8-Pro (204.8V, 8kWh) and each further module adds 102.4V and 4kWh up to GB-L24-Pro (614.4V, 24kWh). The system voltage window is 166.4–700V. Recommended current is 20A, nominal charge and discharge current 40A, and discharge peaks of 50A are allowed for 2 minutes at 25°C. Usable energy is 90% of nominal, for example 21.6kWh on GB-L24-Pro.
The modules include an explosion relief vent and a fire protection device that Deye says cuts off the fire source within 3 seconds. Low-temperature cells allow charging and discharging from -20 to 55°C, and temperature sensing covers the main components. Deye rates the system for at least 6000 cycles at 0.5C to 70% end of life and gives a 10-year warranty, ending at the warranty period or the warranted energy, whichever comes first.
Although the enclosure is IP65 with anti-corrosion design to C2 or better, the manual limits installation to indoor or roofed sites, out of the sun, in a fireproof room with its own fire alarm, at up to 2000m and 5–90% humidity. Modules weigh 39kg and need two people; the control box is fixed to the wall with expansion bolts. The supplied 2m power cables (6AWG, 1000V) and communication cable connect the control box to the inverter's battery and BMS ports.
Up to 16 stacks can be paralleled through a combiner box. Without Deye's combiner, Deye requires a device rated for 1000V DC and 50A with 50A breaking current, IP55 if outdoors; cable lengths from each stack to the inverter should be equal and below 20m in total. Each stack needs at least two and at most six modules.
The touch LCD on the control box shows state of charge, power and total voltage and flags faults such as over-voltage, under-voltage, over-temperature, insulation and charge over-current. After assembly the installer enters the number of modules in the maintenance menu. A coloured light strip shows self-check, charging, alarm and fault. Battery data reach the inverter over CAN 2.0 or RS485, and can also be read on a PC with Deye's upper-computer software.
At least two and at most six GB-L-Pro-Pack4.1-2 modules per stack, plus one GB-L base and one GB-LBS-Pro control box. Two modules give 8kWh and six give 24kWh.
The enclosure is IP65, but Deye's manual allows installation only indoors or under a roof, away from direct sun and heat sources, in a room with an independent fire alarm.
A stack can hold up to six modules in series. After changing the number of modules the installer must set the new module count on the control box display and restart the system.
A high-voltage hybrid inverter whose battery input covers the stack voltage: 204.8V nominal for two modules up to 614.4V for six, within a 166.4–700V operating range, communicating over CAN or RS485.

Deye
250A51.2V
Available — quantity not tracked

Deye
120A
Available — quantity not tracked

Deye
180A
Available — quantity not tracked

Deye
50A
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.