Italian company since 2015 · litio.storeGenuine products · Full manufacturer warrantyReal people, real answers · Quote within 1–2 working days

Deye · BMS and protection

Deye AI-W5.1-PDU1-B PDU with basePower distribution unit and base for AI-W5.1-B stacks with an external inverter

250A51.2V

€517.65ex. VATIndicative price · shipping excluded, by pallet
See the shipping cost

Batteries and inverters travel on a pallet with a freight carrier. The cost depends on the country and on the total weight of the order, excluding VAT.

Package weight: 26kg

CountryHalf pallet, up to 500kgFull pallet, up to 750kg
Austria€230.00€320.00
Belgium€230.00€320.00
Bulgaria€320.00€410.00
Croatia€320.00€410.00
CyprusOn request
Czechia€230.00€320.00
Denmark€230.00€320.00
Estonia€320.00€410.00
Finland€320.00€410.00
France€230.00€320.00
Germany€230.00€320.00
Greece€320.00€410.00
Hungary€320.00€410.00
Ireland€320.00€410.00
Italy€230.00€320.00
Latvia€320.00€329.24
Lithuania€320.00€410.00
Luxembourg€230.00€320.00
MaltaOn request
Netherlands€230.00€320.00
Poland€230.00€320.00
Portugal€320.00€410.00
Romania€320.00€410.00
Slovakia€320.00€410.00
Slovenia€320.00€410.00
Spain€230.00€320.00
Sweden€320.00€410.00

Above 750kg the pallets add up: 1,000kg, for example, is one pallet plus a half. In the quote we calculate shipping on the weight of the whole order.

Available — quantity not tracked

Buy now on litio.store

Or add the product to your quote: we reply within 1–2 working days. The button opens your cart on litio.store, our online shop.

How much solar do you need?From consumption to a complete Deye bill of materials in a minute, with your area's yield.Work it out →Configure your system in two minutesPick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and the full bill of materials, ready for your quote.Open the configurator →
How to buy

Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.

Sold by Litio Store SRL

An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.

About us
Genuine product, full manufacturer's warranty

New, genuine Deye products with the full manufacturer's warranty and all their documentation.

Overview

This set contains the two parts every AI-W5.1-B battery stack needs when it is connected to a separate low-voltage inverter: the AI-W5.1-PDU1-B power distribution unit, which sits on top of the stack, and the base the stack stands on. The PDU carries a circuit breaker, the BMS switch, bolted positive and negative battery outputs, an RJ45 PCS port that passes battery data to the inverter over CAN at 500kbps, and parallel IN/OUT ports. One PDU manages one to six 5.12kWh modules (5.12–30.72kWh at 51.2V), with up to 250A continuous and 360A for 10 seconds from three modules upwards. Battery cables, a 2m communication cable, a ground cable and wall brackets are in the box.

  • 5.12kWh, 100Ah, 51.2V LiFePO4 per module
  • 1 to 6 modules per stack, 6 stacks in parallel
  • Cable-free stacking through quick connectors
  • IP65 after stacking, indoor or outdoor
  • Charging from -20°C on versions with heating
  • 10-year warranty, 16MWh throughput per module

How it works

AI-W5.1-B is the battery module of Deye's AI-W (SPRING) residential storage range. Each module holds 100Ah of lithium iron phosphate cells at 51.2V and has its own BMS, circuit breaker and air vent valve. Modules are stacked on a base and joined by quick connectors guided by pillars, so no cables run between them. A power distribution unit sits on top of the stack and connects it to the inverter.

Deye offers two PDUs for the same module. AI-W5.1-PDU1-B links the stack to an external low-voltage inverter through bolted battery outputs and a CAN/RS485 PCS port. AI-W5.1-PDU3-B carries a matching Deye hybrid inverter on top of the stack, forming the all-in-one AI-W5.1-B-ESS of 3.6–10kW single-phase or 5–12kW three-phase.

Key features

One cluster takes one to six modules, from 5.12 to 30.72kWh. Charge and discharge current grows with the stack: 100A for one module, 200A for two and 250A from three modules, with 10-second peaks of 150A, 270A and 360A. Deye recommends 90% depth of discharge and rates the cells for at least 6000 cycles at 0.5C to 70% end of life, with 16MWh throughput per module and a 10-year warranty. Up to six clusters (36 modules) can run in parallel.

Installation and compatibility

The stack is floor-mounted and reaches IP65 once assembled, so it can stand indoors or outdoors, preferably away from direct sun, rain and snow. Deye's quick guide draws the required clearances, mostly 300mm or more, and a 10–35mm gap at the wall; side brackets and M6 expansion bolts tie the stack to the wall, and adjustable feet on the base level it. Charging needs 0–55°C, or down to -20°C on modules with heating film, identified by the serial number prefix.

Monitoring and settings

Module addresses are assigned automatically, and battery data reach the inverter over CAN 2.0 or RS485 through the PDU. Each module shows run, alarm and error LEDs, while the PDU adds five state-of-charge LEDs. With a Deye inverter set to lithium mode the packs can be checked on the inverter display, and Deye states that remote monitoring and firmware upgrades are supported. Installers can also read every module on a PC through the upper-computer software.

Questions and answers

Do I need anything besides the battery modules?

Yes. A stack needs a base and one PDU: AI-W5.1-PDU1-B to connect an external inverter, or AI-W5.1-PDU3-B to mount a matching Deye hybrid inverter on top as an all-in-one system.

How many modules can be installed?

One to six modules per stack, and up to six stacks in parallel, for 36 modules in total according to Deye's brochure.

Can the AI-W5.1-B be installed outdoors?

Yes. The assembled stack is IP65 and Deye allows indoor and outdoor installation; the manual recommends avoiding direct sunlight, direct rain and snow cover to extend battery life.

Does the module work in winter?

Discharge works from -20°C. Charging needs at least 0°C, except on modules with the heating film, which can charge from -20°C with heating on.

How much current can a stack deliver?

Deye states 100A for one module, 200A for two and 250A for three to six modules, with 10-second peaks of 150A, 270A and 360A. Actual current depends on temperature and state of charge.

You may also like

BMS and protectionDeye GB-LBS-Pro high-voltage control box – BMS and protection – photo 1

Deye

GB-LBS-Pro

50A

from€600.00ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

BMS and protectionDeye BOS-G-PDU-2 control box for BOS-G-Pro – BMS and protection – photo 1

Deye

BOS-G-PDU-2

120A

from€682.35ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

BMS and protectionDeye BOS-B-PDU-2-A control box – BMS and protection – photo 1

Deye

BOS-B-PDU-2-A

180A

from€876.47ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

BMS and protectionDeye GB-LB control box with GB-L Base – BMS and protection – photo 1

Deye

GB-LB + GB-L Base

50A

from€689.49ex. VATIndicative price · shipping excluded, by pallet

Available — quantity not tracked

  • Italian company since 2015Litio Store SRL, Sigillo (Perugia)
  • Genuine productsFull manufacturer warranty
  • Datasheets and manualsFor every product, ready to download
  • Real people, real answersQuote within 1–2 working days

PV Radar

Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.

What would you like to receive?