Aiko Neostar 2P60 AIKO-A520-MAH60Mw 520Wp – pallet of 37 modules (19.24kWp)Pallet of 37 mono-glass ABC modules with black frame, 520Wp each

Overview

A full pallet of 37 Aiko Neostar 2P60 AIKO-A520-MAH60Mw modules, 19.24kWp in total, as packed by Aiko. Each 120-cell mono-glass module measures 1,954×1,134×30mm, weighs 23.1kg and delivers 520Wp at 23.5% efficiency, with 45.42V Voc, 14.29A Isc and 13.58A at maximum power. The black frame, 3.2mm tempered glass and IEC fire Class C rating match the single module. Every module on the pallet belongs to the same power class, which Aiko requires within a string.

• n-type ABC cells with no busbars on the front
• Pmax temperature coefficient -0.26%/°C
• 108-cell 1757×1134mm and 120-cell 1954×1134mm formats
• Mono-glass 3.2mm or dual-glass 2.0+2.0mm builds
• 30-year linear power warranty, 88.85% at year 30
• Standard Aiko pallet holds 37 modules

How ABC cells work

Aiko's all-back-contact (ABC) cells collect both polarities on the rear of an n-type wafer, so the front of the module carries no busbars or fingers and the whole cell surface is exposed to light. Aiko names partial-shading optimisation, a better temperature coefficient, a limit on hot-spot temperature and micro-crack resistance as design aims. Across this range the coefficients are -0.26%/°C for Pmax, -0.22%/°C for Voc and +0.05%/°C for Isc.

Versions in this range

Neostar 2P (AIKO-A-MAH54Mw) is the mono-glass version: 108 cells under 3.2mm tempered glass, a black anodised frame, 1757×1134×30mm and 20.6kg, with IEC fire Class C. Neostar 2P+ (AIKO-A-MAH54Dw) uses the same cell layout between two 2.0mm coated semi-tempered glass sheets; it weighs 24.2kg and is rated IEC fire Class A.

Neostar 2P60 (AIKO-A-MAH60Mw) and Neostar 2S+60 (AIKO-A-MAH60Db) carry 120 cells in a 1954×1134×30mm frame: the first is mono-glass at 23.1kg, the second a full-black dual-glass module at 26.5kg. The current 2P+ and 2S+60 datasheets add BNPI ratings (1000W/m² front, 135W/m² rear), which quantify the extra output from light reaching the rear glass.

Mounting and string design

Aiko's installation manual asks for at least 10cm between frame and roof surface to preserve the roof fire rating, the same orientation and tilt for every module in an array, and a tilt of at least 10°. The 5400Pa front and 2400Pa rear loads apply only to the bolt and clamp positions tabulated in the manual; some clamp layouts are rated as low as ±1600Pa.

Modules of different electrical classes must not share a string, and the string open-circuit voltage has to be checked at the lowest site temperature using the Voc coefficient. Frames must be earthed through the 4.2mm grounding holes; Aiko recommends M4 stainless hardware tightened to 3–7Nm with 4mm² copper wire. Drilling or modifying the frame voids the warranty.

Warranty and coastal sites

The 2P, 2P+ and 2P60 fall under Aiko's distributed-module warranty: 15 years on the product, with paid extensions to 20 or 25 years in the European markets listed in the warranty. The full-black 2S+60 is covered by the residential warranty with 25 years on the product.

All four have a 30-year linear power warranty on front-side output: at most 1% loss in the first year and 0.35% per year afterwards, which leaves at least 90.6% at year 25 and 88.85% at year 30. Aiko does not support these modules between 50m and 500m from the seashore, where it recommends its Sirius range.

Questions and answers