Trina Solar Vertex S+ TSM-455NEG9R.28 455Wp – pallet of 36 modules (16.38kWp)Pallet of 36 dual-glass n-type i-TOPCon modules, 455Wp each

Overview

This pallet holds 36 Trina Solar TSM-455NEG9R.28 modules, one original Trina box with 16.38kWp in total. Each Vertex S+ module delivers 455Wp at 22.8% efficiency, with 45.0V and 10.11A at maximum power, 53.4V Voc and 10.77A Isc, and 348W under NOCT conditions. The 144-cell, 1,762×1,134×30mm dual-glass format weighs 21.0kg and carries 5400Pa snow and 4000Pa wind test loads. Trina specifies a positive power selection of 0/+5W for every module.

• 144 n-type i-TOPCon cells, 450–475Wp, up to 23.8%
• 1.6mm + 1.6mm dual glass, 21.0kg, black frame
• Test loads 5400Pa snow and 4000Pa wind
• 25-year product and 30-year power warranty (EU datasheet)
• 36 modules per box, 936 per 40ft container

Design and technology

The NEG9R.28 is the residential format of Trina Solar's Vertex S+ range. It uses 144 n-type i-TOPCon monocrystalline cells joined by multi-busbar, high-density interconnection, laminated between a 1.6mm anti-reflective heat-strengthened front glass and a 1.6mm heat-strengthened rear glass. The module measures 1,762×1,134×30mm, weighs 21.0kg and has a black anodised aluminium frame. Trina designs it to work with mainstream inverters, optimisers and mounting systems, so it fits most existing rooftop designs.

Electrical data

The current EU datasheet (version 2026-A) covers 450 to 475Wp in 5W steps with a 0/+5W power selection and 22.5–23.8% efficiency. Open-circuit voltage ranges from 52.9V to 55.0V and short-circuit current from 10.74A to 10.93A. The temperature coefficients are -0.29%/°C for Pmax, -0.24%/°C for Voc and +0.04%/°C for Isc, with a NOCT of 43±2°C. Maximum system voltage is 1500V DC (IEC), the series fuse rating is 25A and the 98th-percentile operating temperature is 70°C.

Installation notes from the manual

Trina's Vertex user manual lists the NEG9R series among modules designed for distributed systems and prohibits their use in ground-mounted power plants. With four clamps on the long frame and rails running across it, the clamp centrelines must sit in the 300–350mm zone given in the manual, which is rated for 4000Pa uplift and 5400Pa downforce. Clamps must overlap the frame by 8–12mm and never touch the glass; bolted fixing uses the four 9×14mm holes with M8 bolts at 16–20Nm.

Ratings of cables, fuses and other components connected to the array are sized with 1.25 times the marked Voc and Isc. The manual recommends a tilt of at least 10° so that rain washes the glass, a gap of at least 5mm between modules and installation below 2000m altitude. Connectors may only be mated with the counterpart types approved in the manual's appendix.

Warranty and packing

The EU datasheet states a 25-year product workmanship warranty and a 30-year power warranty, with no more than 1% loss in the first year and 0.4% per year from year 2 to 30; Trina's chart shows 87.4% of nameplate power after 30 years. Modules ship 36 to a box, so one pallet is one factory box, and 936 fit a 40ft container. TS4 Plus and TS4 connectors are listed, with MC4 EVO2 on special order.

Questions and answers