SolarEdge Home Wave SE9K-RW0TEBEN49kW three-phase string inverter for SolarEdge power optimisers

Overview

The SE9K-RW0TEBEN4 is the 9kW model of the SolarEdge Home Wave Inverter Three Phase, rated 9000VA at 14.5A per phase on a 400/230V supply. It accepts up to 13.5kW of PV at STC through SolarEdge power optimisers and a maximum DC input current of 15A. European weighted efficiency is 97.5% and peak efficiency 98%. The inverter shares the series' 16.4kg IP65 enclosure, integrated arc-fault protection, export limitation and home energy management functions, and is set up on site with the SetApp app.

• Eight models from 3kW to 10kW, 16.4kg housing
• PV array up to 150% of rated AC power
• 98% maximum efficiency, up to 97.6% European
• Commissioning with the SetApp smartphone app
• Integrated arc-fault protection to UL 1699B
• IP65, -40…+60°C, below 40dBA

How it works

Home Wave three-phase inverters are fixed-voltage inverters. Each PV module has a SolarEdge power optimiser that tracks its own maximum power point, so the inverter can keep the string at a nominal 750V whatever the string length, orientation or shading. The inverter converts this DC to 400/230V three-phase AC on a 3/N/PE connection. The optimisers also report module-level data and drop to a 1V safety voltage each when the inverter is switched off or disconnected.

Key features

All models share a 16.4kg enclosure 540mm high, 315mm wide and 191mm deep, cooled by an internal fan and quieter than 40dBA. Maximum DC power is 150% of the rated AC power, for instance 15kW on the SE10K, with a 900V maximum input voltage and 700kΩ isolation monitoring. Arc-fault protection is integrated and user configurable, and export limitation and home energy management of controlled devices are built in. SolarEdge describes the series as battery-ready, pending battery availability and a firmware upgrade.

Installation and compatibility

The inverter mounts on a wall, stud frame or pole with the supplied bracket, preferably out of direct sun. SolarEdge asks for at least 20cm above and below and 10cm at each side, and 40cm between inverters mounted one above the other. AC cables enter through a 15–21mm gland and PV strings use two MC4 pairs. The internal RCD trips at 30mA and 300mA; if local rules require an external RCD, SolarEdge recommends type A at 100mA or 300mA, one per inverter.

Monitoring and settings

Grid connection standards listed include CEI 0-21, VDE-AR-N 4105, EN 50549-1, Tor Erzeuger Typ A, C10/11, RD1699, VFR 2019, G98 and G100; the SE3K, SE4K and SE6K are only offered in some countries. SetApp commissions the inverter through its Wi-Fi access point and updates the firmware. RS485 and Ethernet are built in, while the SolarEdge Home Network, Wi-Fi and cellular are optional connections to the monitoring platform.

Questions and answers