Sigenergy Sigen Hybrid 6.0 SP2 6kW6kW single-phase hybrid inverter for SigenStor BAT

Overview

The Sigen Hybrid 6.0 SP2 is the largest SP2 model: 6kW nominal and 6.6kVA maximum single-phase output at up to 30A. It accepts up to 12kW of PV on two MPP trackers, one 16A string each, and reaches 98.3% European efficiency. With a SigenStor BC and SigenStor BAT modules it becomes a hybrid storage system, and with a Sigen Energy Gateway it provides backup with a 9kW peak for 10 seconds. The installation guide calls for a 40A AC switch rated at least 240V and 6mm² AC cable.

• 2.0–6.0kW single-phase, 220/230/240V
• PV up to 200% of AC rating, 50–550V MPPT
• 1–6 SigenStor BAT modules via SigenStor BC
• 0ms backup switchover with Sigen Energy Gateway
• 99mm deep, 11.5kg, IP66, fanless at 25dB
• European efficiency up to 98.3%

How it works

Sigen Hybrid SP2 inverters are single-phase units for homes on 220, 230 or 240V supplies. Used alone they convert PV power for the house and grid; connected to a SigenStor BC battery controller with one to six SigenStor BAT modules, they become hybrid inverters that store surplus solar energy. The battery stack is installed separately and linked to the inverter by DC and CAT6 cables, and the battery side works in a 300–600V window.

For backup the SP2 needs a Sigen Energy Gateway, which keeps the selected circuits supplied with 0ms load-side disruption when the grid fails. Off-grid, the inverter provides 150% of its nominal power for 10 seconds to cope with starting currents. A Sigen power sensor at the grid connection point provides the measurement for self-consumption control and zero export.

Key features

Seven sizes from 2.0 to 6.0kW accept PV power up to twice the AC rating, for example 12kW on the 6.0 SP2. Two MPP trackers each take one string at up to 16A (22A short-circuit) between 50 and 550V, with 100V start-up and 600V maximum input, which suits short strings on small roofs. Maximum efficiency is 98.6% on every size. Protection covers AFCI, insulation and residual current monitoring, and type II DC/AC surge arresters.

Installation and compatibility

The wall-mounted housing measures 373×473×99mm, weighs 11.5kg and is cooled by natural convection at 25dB, with IP66 protection for -30 to +60°C up to 4,000m. Sigenergy recommends an AC switch rated at least 240V with 25A for 2.0–4.0kW and 40A for 4.6–6.0kW, AC cable of 4mm² up to 3.6kW and 6mm² from 4kW, and 4–6mm² PV cable. Supported earthing systems are TN-S, TN-C, TN-C-S and TT.

Choose a sheltered location out of direct sun, rain and snow, at least 500m from the seashore or other corrosive sources, and never in a vehicle or boat. Up to 20 Sigen Hybrid inverters can be cascaded. The datasheet lists IEC/EN 62109-1/-2 and IEC/EN 61000-6-1/-2; Sigenergy refers to its download centre for country grid certificates.

Monitoring and settings

The inverter connects through WLAN, Fast Ethernet, RS485 or an optional Sigen CommMod 4G module. After the installer has created the system in the mySigen app, the owner can choose self-consumption, time-based control with up to 24 periods, full feed-in, Sigen AI or remote EMS modes, reserve battery capacity for outages and set a peak-shaving limit on grid import.

Questions and answers