
Marstek
CT003
Wi-Fi reader for digital electricity meters, for Marstek Venus storage
988 available




Marstek · Monitoring
100A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Marstek products with the full manufacturer's warranty and all their documentation.
The CT002 is Marstek's DIN-rail smart meter for the main distribution board. It measures voltage and current on all three phases, or at up to three points of a single-phase installation, through three current channels rated 0–100A with 1% accuracy, and passes the readings to Marstek storage over Wi-Fi so that the battery follows household consumption and avoids feeding into the grid. Marstek supports it with the Venus E Gen 3.0, Venus E Mini and Mars i Plus. The meter is powered from 100–265V AC, uses less than 2W, is set up via Bluetooth in the Marstek app and also has RS485 and Ethernet ports. It must be installed by an electrician.
Marstek plug-in batteries such as the Venus E Gen 3.0 can charge and discharge on a schedule without any meter, but to match household consumption and keep export to the grid close to zero they need to know what flows through the grid connection. Both meters provide that figure and send it over Wi-Fi to the battery, which adjusts its power accordingly. The CT002 measures with its own current sensors in the distribution board; the CT003 reads the values already provided by a digital utility meter.
The CT002 (model code TPM2-100CT) is a DIN-rail module with three current channels of 0–100A and 1% accuracy for current, voltage and apparent power, powered from 100–265V AC. It works on three-phase four-wire supplies or measures up to three points in a single-phase installation, and besides Wi-Fi and Bluetooth it has RS485 and Ethernet ports. Marstek requires installation by an electrician and lists the meter for the Venus E Gen 3.0, Venus E Mini and Mars i Plus.
The CT003 needs no work in the distribution board: it connects to the customer interface of the utility meter and is powered with 5V through USB-C. Marstek makes three versions, SMR-P1 for meters with a P1 port, SMR-TIC for meters with a TIC output and SMR-IR, an optical head for meters with an infrared interface; the IR and TIC versions also have Ethernet. Which version fits depends on the interface of the installed meter, so check it before ordering.
Both meters are paired with the battery in the Marstek app via Bluetooth and then report over 2.4GHz Wi-Fi, with live consumption data and charts in the app. Marstek notes that three-phase consumption is tracked per phase, but if one phase is heavily loaded the storage may not cover it, and recommends spreading large appliances across the phases.
The CT002 when an electrician can fit a DIN-rail module with current sensors in the main board; the CT003 when the digital utility meter has an accessible P1, infrared or TIC interface.
Yes. Marstek states that the CT002 must be installed in the distribution board by a qualified electrician.
Yes, in manual or scheduled modes. Self-consumption mode and zero export need a supported meter such as the CT002 or CT003.
With 5V 1A through a USB-C connector; it draws less than 2W.

Redarc
500A
Available — quantity not tracked

Redarc
Battery state-of-charge display for the REDARC Smart Battery Monitor
Available — quantity not tracked

Redarc
4.3in RedVision control display for TVMS Rogue, TVMS Prime and Manager30
Available — quantity not tracked

Safiery
Battery Bluetooth radar level sensor for diesel tanks with reflector plate
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.