Italian company since 2015 · litio.storeGenuine products · Full manufacturer warrantyReal people, real answers · Quote within 1–2 working days

Eastron · Monitoring

Eastron SDM230-Modbus single-phase energy meter100A direct-connected MID meter with RS485 Modbus RTU for inverter export control

100A

€72.94ex. VATIndicative price · EU delivery included

17 availableStock updated daily by Litio Store

Buy now on litio.store

Or add the product to your quote: we reply within 1–2 working days. The button opens your cart on litio.store, our online shop.

Configure your system in two minutesPick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and the full bill of materials, ready for your quote.Open the configurator →
How to buy

Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.

Sold by Litio Store SRL

An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.

About us
Genuine product, full manufacturer's warranty

New, genuine Eastron products with the full manufacturer's warranty and all their documentation.

Overview

The SDM230-Modbus is a two-module DIN-rail energy meter for single-phase circuits up to 100A, connected directly without current transformers. It is MID certified (annexes B and D, class 1 for active energy) and measures voltage, current, frequency, power factor, active, reactive and apparent power and imported and exported energy, with four selectable ways of totalising kWh for PV and battery systems. Readings are available over RS485 Modbus RTU and two pulse outputs. Inverter makers use it for export limitation: Deye lists it for its single-phase string and low-voltage hybrid inverters, Solplanet for the ASW S-G2 series. Check the approved meter list of your inverter before ordering.

  • Single-phase, 100A direct connection without CTs
  • MID B+D certified, class 1 active energy
  • RS485 Modbus RTU on the SDM230-Modbus
  • Four selectable kWh totalising modes
  • Two-module DIN-rail housing, backlit display
  • Listed by Deye and Solplanet for export control

How it works

SDM230 meters are wired in series with a single-phase circuit of up to 100A and measure energy in both directions. They show voltage, current, frequency, power factor, active, reactive and apparent power, maximum demand and imported and exported active and reactive energy. Four modes define how the total kWh register combines import and export (import only, import plus export, export minus import, import minus export), which helps when the meter sits at the grid connection of a PV or battery system.

Versions and outputs

Eastron builds four versions: SDM230-Modbus with RS485 Modbus RTU and pulse outputs, SDM230-MBus with M-Bus to EN 13757-3, SDM230-Pulse with pulse outputs only and SDM230-2T, a dual-tariff version with Modbus. On the Modbus model, baud rate (1200–9600), parity, stop bits and address (1–247) are set from the front-panel menu, where communication parameters are password protected. Two passive pulse outputs, one configurable, give between 1 and 1000 pulses per kWh.

Installation and compatibility

The meter occupies two DIN-rail modules (DIN 43880) and has cage terminals for cables up to 25mm². It is rated IP51 for indoor boards, -25°C to +55°C and altitudes up to 3000m. MID certification covers EN 50470-1 and EN 50470-3 class B, with EMC to EN 61326-1 and safety to EN 61010-1; class 1 accuracy is guaranteed from 0.5A upwards.

Several inverter manufacturers list the SDM230-Modbus in their manuals: Deye for its SUN-G04P1 single-phase string inverters and SG05LP1 low-voltage hybrids, Solplanet for its ASW S-G2 single-phase inverters. Each brand defines its own Modbus address and wiring to the meter port, so follow the inverter manual and confirm that your model lists this meter.

Questions and answers

Does the SDM230 need current transformers?

No. It is connected directly in the circuit and measures up to 100A.

Which version is needed for an inverter?

The SDM230-Modbus, which communicates over RS485 Modbus RTU; check that the inverter manual lists it.

Is it MID certified?

It is MID certified (annexes B and D) with class 1 accuracy for active energy.

Can it measure exported energy?

Yes. Imported and exported energy are registered separately, and the total register can be set to one of four modes.

You may also like

MonitoringREDARC Smart Battery Monitor BSEN500 with 500A shunt – Monitoring – photo 1

Redarc

BSEN500

500A

from€181.20ex. VATIndicative price · EU delivery included

Available — quantity not tracked

MonitoringREDARC RedVision Essentials display DISP4000 – Monitoring – photo 1

Redarc

DISP4000

Battery state-of-charge display for the REDARC Smart Battery Monitor

from€163.35ex. VATIndicative price · EU delivery included

Available — quantity not tracked

MonitoringREDARC RedVision 4.3in display DISP4300 – Monitoring – photo 1

Redarc

DISP4300

4.3in RedVision control display for TVMS Rogue, TVMS Prime and Manager30

from€465.00ex. VATIndicative price · EU delivery included

Available — quantity not tracked

MonitoringSafiery STAR-Tank RDR10208002-FUEL radar fuel tank sensor – Monitoring – photo 1

Safiery

RDR10208002-FUEL

Battery Bluetooth radar level sensor for diesel tanks with reflector plate

from€330.96ex. VATIndicative price · EU delivery included

Available — quantity not tracked

  • Italian company since 2015Litio Store SRL, Sigillo (Perugia)
  • Genuine productsFull manufacturer warranty
  • Datasheets and manualsFor every product, ready to download
  • Real people, real answersQuote within 1–2 working days

PV Radar

Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.

What would you like to receive?