
Deye
SUN-SMART-CT01
Single- or three-phase DIN-rail meter with CT inputs, LoRa and RS485
Available — quantity not tracked

Deye · Monitoring
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Deye products with the full manufacturer's warranty and all their documentation.
SUN-SMART-TX01 is the LoRa gateway of Deye's wireless energy management system. It screws into a free COM gland of a Deye hybrid inverter, connects to the inverter's meter port with the supplied RJ45 cable and takes 5V DC from it, or from a USB-C supply where the port cannot provide power. One transmitter pairs with up to 10 smart switches or plugs, 2 SUN-SMART-CT01 meters and 1 Deye EV charger, over about 200m in open space on 863–870MHz, and keeps working without internet. The inverter must offer the Smart Devices menu: Deye notes that some units need a firmware update and that very old hardware may not support it, so check your inverter before ordering.
Deye's wireless energy management system turns the hybrid inverter into the local control centre of the home. A SUN-SMART-TX01 transmitter is screwed into a free cable gland of the inverter and connected to its meter port; from there it talks over LoRa (863–870MHz) to the other devices, at up to about 200m in open space.
The SUN-SMART-CT01 meter measures power at the grid connection point, or at an existing on-grid inverter, and sends it to the inverter for export control. SUN-SMART-SWITCH01P3 and SUN-SMART-PLUG01P1-F switch loads according to rules based on time and battery state of charge. Deye's AC wallboxes join the same network.
LoRa wakes faster and has lower latency than Wi-Fi devices that route commands through a cloud server, and the devices keep working locally when the internet is down. One transmitter handles up to 10 switches and plugs, 2 CT meters and 1 EV charger. The rules are set on the inverter display or in the Deye Cloud app, for example to start a heat pump or a water heater only when there is solar surplus or enough charge in the battery.
The CT01 mounts on a DIN rail in the distribution board (IP20) and accepts CTs with 50mA secondary on one or three phases; it can also be wired to the inverter by RS485. The switch is IP65 for outdoor loads up to 25A per phase, the plug IP20 for indoor sockets up to 16A. The transmitter draws 5V from the inverter meter port, or from a USB-C supply where that port cannot provide power.
Deye presents the system for all its hybrid inverters, but the inverter must show the Smart Devices menu under System Setup. Some units need a firmware update and very old hardware may not be supported, so the inverter model and serial number should be checked before ordering.
Devices are paired by channel scan from the Smart Devices page of the inverter. To use the transmitter as the meter link, the installer enables Ex_Meter For CT in the Advanced Function menu and selects Smart TX under Meter Select. Detail pages show the power of each CT, the state of each switch and plug and the EV charger, and the same settings are available in Deye Cloud.
Yes. The CT01 can also be wired by RS485, but the switch, the plug and the LoRa link of the CT and EV charger all go through one SUN-SMART-TX01 on the inverter.
Up to 10 smart switches and plugs in total, 2 SUN-SMART-CT01 meters and 1 Deye EV charger.
Deye states compatibility with its hybrid inverters, but the inverter needs the Smart Devices menu. If it is missing, a firmware update may be required, and very old hardware may not be supported.
The devices communicate directly with the inverter over LoRa, so the configured rules keep working locally.

Deye
Single- or three-phase DIN-rail meter with CT inputs, LoRa and RS485
Available — quantity not tracked

Deye
25A
Available — quantity not tracked

Deye
16A
Available — quantity not tracked

Deye
Plug-in Ethernet data logger for Deye inverters, IP65
Available — quantity not tracked

Deye
Plug-in 4G cellular data logger for Deye inverters
Available — quantity not tracked

Deye
USB Wi-Fi and Bluetooth 5.3 data logger, 1-minute refresh, IP65
Available — quantity not tracked

Deye
100A
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.