
Deye
LSE-4W
Plug-in Ethernet data logger for Deye inverters, IP65
Available — quantity not tracked

Deye · Monitoring
100A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Deye products with the full manufacturer's warranty and all their documentation.
SDM630-MODBUS V3 is a three-phase energy meter of the Eastron SDM630 series, supplied here under the Deye name for export control and consumption metering with hybrid inverters. It connects directly up to 100A per phase, without current transformers, measures single-phase two-wire, three-phase three-wire and three-phase four-wire supplies and powers itself from the measured voltage. The backlit LCD shows voltages, currents, active, reactive and apparent power, power factor, frequency, harmonic distortion, maximum demand and import and export energy, and the data reach the inverter over Modbus RTU (RS485); two pulse outputs are also available. Deye three-phase manuals select an Eastron meter in the Meter Select menu and name the SDM630-Modbus V2, so confirm the V3 with your inverter.
A Deye inverter sends its data to Deye Cloud through a logger plugged into its communication port. Stick loggers fit the RS232 logger port and differ only in the uplink: LSW-5 uses Wi-Fi with an integrated antenna, LSE-4W a wired Ethernet connection and LS4G the 4G mobile network with a micro SIM. The DL1000B-WIFI is the newer design for inverters with a USB logger port, with Wi-Fi and Bluetooth 5.3.
One logger serves one inverter. All draw their supply from the inverter, from 1.5W for the Wi-Fi and Ethernet sticks to 5W for the 4G stick. For export control and consumption metering, hybrid inverters also need a meter at the grid connection point, such as the three-phase SDM630-MODBUS V3.
Stick loggers sample data every 5 minutes by default (the LS4G can be set from 1 to 15 minutes), resume data after a connection break and accept remote firmware updates. The DL1000B-WIFI refreshes every minute by default, adjustable to 30 minutes, back-fills data collected offline and offers a local app mode over Bluetooth that works without internet.
The SDM630-MODBUS V3 is a four-module DIN-rail meter of the Eastron SDM630 series that connects directly up to 100A per phase, measures single- and three-phase supplies and sends readings over Modbus RTU.
Check which port the inverter has before ordering: stick-logger port or USB. Deye states that the port type depends on the inverter received, so the label on the unit is the reference. The loggers have IP65 housings and work outdoors; the LS4G needs a SIM card with a data plan and good mobile coverage, the LSE-4W a network cable to the router.
The meter is installed in the distribution board at the grid connection point and wired to the inverter's meter port by RS485. Deye's three-phase manuals select Eastron meters in the Meter Select menu and name the SDM630-Modbus V2, so the V3 should be confirmed with the inverter model and firmware.
Each logger is added to Deye Cloud with its serial number from the label or by scanning its code, then connected to the router, through Bluetooth or a local web page for the Wi-Fi and Ethernet models. LEDs on the loggers show communication with the inverter, the network and the server, which makes it easy to find a fault on site.
LSW-5 where there is good Wi-Fi at the inverter, LSE-4W where a network cable is available, LS4G for sites without internet, and DL1000B-WIFI if the inverter has a USB logger port.
No. Each inverter needs its own logger.
No. They are powered by the inverter through the logger port.
The meter can measure single-phase two-wire supplies, but Deye's single-phase manuals name single-phase meters such as the Eastron SDM230 or CHINT DDSU666. Check the meter list of your inverter before ordering.

Deye
Plug-in Ethernet data logger for Deye inverters, IP65
Available — quantity not tracked

Deye
Plug-in 4G cellular data logger for Deye inverters
Available — quantity not tracked

Deye
USB Wi-Fi and Bluetooth 5.3 data logger, 1-minute refresh, IP65
Available — quantity not tracked

Deye
Plug-in Wi-Fi data logger for Deye inverters, integrated antenna, IP65
Available — quantity not tracked

Deye
LoRa gateway linking a Deye hybrid inverter to smart CT, switches, plugs and EV charger
Available — quantity not tracked

Deye
Single- or three-phase DIN-rail meter with CT inputs, LoRa and RS485
Available — quantity not tracked

Deye
25A
Available — quantity not tracked

Deye
16A
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.