Deye BOS-A 99.84kWh rack battery system99.84kWh 499.2V cluster: 13 modules, control box and rack

Overview

Deye BOS-A 99.84kWh rack battery system is a complete BOS-A cluster sold under one code: 13 BOS-A-Pack7.68 modules of 7.68kWh, the BOS-A-PDU-2 (1000V 160A PDU) and the 14-level BOS-A rack cabinet. It stores 99.84kWh at 499.2V nominal, about 89.9kWh usable at 90% depth of discharge, with up to 160A charge and discharge current, and the assembled system weighs about 1083kg. The module count is already matched to the rest of the system, so there is nothing to check or add, and because the series takes 7 to 21 modules (53.76–161.28kWh) the cluster can grow later. It pairs with Deye three-phase hybrid inverters and PCS from 50 to 100kW.

• 7.68kWh modules of 200Ah at 38.4V nominal
• 7 to 21 modules in series per cluster
• Up to 160A charge and discharge, 100A recommended
• Up to 16 clusters in parallel
• Fire protecting device inside each module
• ≥6000 cycles, 10-year warranty

What's in the kit

• 13 × Deye BOS-A-Pack7.68
• 1 × Deye BOS-A-PDU-2
• 1 × Deye BOS-A-14layers-Rack

How it works

BOS-A is Deye's high-voltage rack battery for supermarkets, schools, farms and small factories. Each BOS-A-Pack7.68 module holds 200Ah of lithium iron phosphate cells at 38.4V, and 7 to 21 modules are wired in series inside one or two racks under a BOS-A-PDU-2 high-voltage control box. The resulting cluster runs from 268.8V nominal with 7 modules (53.76kWh) to 806.4V with 21 modules (161.28kWh).

The control box contains the BMS, an isolating switch, a display for state of charge and fault codes, and two pairs of PCS outputs, so a cluster can feed two inverter DC inputs. Deye recommends 100A continuous and allows 160A, a maximum rate of 0.8C, with 90% recommended depth of discharge; the cluster's rated DC power scales from 43.01kW to 129.02kW with the module count.

Key features

Every module carries a fire protecting device with its own temperature detection that releases an extinguishing agent if the internal temperature passes a safety threshold; a triggered module must go back to Deye service. The BMS protects against over-charge, over-discharge, over-current and over-temperature and balances cell voltages. Deye rates the cells for at least 6000 cycles at 0.5C to 70% end of life and gives a 10-year warranty, ending at the period or warranted energy, whichever comes first.

Installation and compatibility

Rack size follows the module count: one 11-layer rack for 7–10 modules, one 14-layer rack for 11–13, two 9-layer racks for 14–17 and two 11-layer racks for 18–21. The IP20 system must stand in an enclosed, fireproof room with an independent fire alarm and, where local rules require, a T60 fire door, at 5–85% humidity and up to 3000m, with 100mm clearance to walls and between racks. BOS-A must not be used as a UPS.

Deye pairs BOS-A with its 50–100kW three-phase hybrid inverters and PCS, for example SUN-50K-SG01HP3-EU-BM4 and SUN-80K-SG02HP3-EU-EM6. When a cluster carries more than 100A, both PCS output pairs must be wired. Several clusters can share an inverter if every cluster in a group has the same module count, and the battery-to-inverter communication cable must stay under 30m.

Monitoring and settings

The control box reports to the inverter over CAN through its PCS COM port and chains to further control boxes through IN and OUT ports. Its display shows state of charge and fault codes, with a yellow light for high voltage on and a red alarm light. In local mode the Deye app connects over Bluetooth to read cluster data, and the BMS firmware can be updated from a USB stick. Deye Cloud gives remote monitoring when the inverter is online.

Questions and answers