
Felicity Solar
FLH96050SCG1
50A
Available — quantity not tracked




Felicity Solar · BMS and protection
50A
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Felicity Solar products with the full manufacturer's warranty and all their documentation.
FLH96050SCG2-H is the control unit that sits on top of every second-generation FLH96050SG2-H tower. It contains the battery management system, breaker and LCD touch screen, connects the tower to the inverter over RS485 or CAN and adds Wi-Fi and Bluetooth for the Fsolar app. Under it go two to six FLH96050SMG2-H modules of 5.12kWh and 102.4V, for 10.24–30.72kWh and 185.6–691.2V, with 25A recommended and 50A maximum continuous current. The -H version manages the module heating, so the tower can charge and discharge from -20°C. The IP65 unit measures 600×385×200mm and weighs 12.5kg, and up to 16 towers can run in parallel. It is supplied only together with battery modules.
An FLH96050 tower stands on a pedestal against the wall and stacks two to six battery modules in series, with the high-voltage control unit placed on top. Each module holds 32 LFP cells of 50Ah and adds 5.12kWh and 102.4V, so a tower ranges from 10.24kWh at 204.8V to 30.72kWh at 614.4V. The control unit carries the BMS, breaker, fuse, LCD touch screen and the inverter terminals, and the datasheet lists inverter interface protection among its functions.
Two generations exist. G1 uses FLH96050SCG1 control units and FLH96050SMG1 modules; G2 uses FLH96050SCG2 or SCG2-H control units with FLH96050SMG2 or SMG2-H modules. The G2 datasheet adds module addressing, a 12V debug port, an integrated grounding layer, balancing between new and old modules and up to 16 towers in parallel.
Every tower delivers 25A recommended and 50A maximum continuous current, with 60A for 15s on G1. Cycle life is at least 6,000 cycles under the datasheet test conditions. G2 towers are specified at 90% depth of discharge, giving 9.21kWh usable from two modules and 27.64kWh from six. The -H version of G2 integrates heating and can charge and discharge from -20°C to +55°C, while non-heated versions charge from 0°C.
The IP65 enclosures allow indoor or outdoor installation as long as the site is shielded from direct sunlight, wind, conductive dust and corrosive gases, below 2000m and away from the sea. The pedestal must sit level against the wall with its arrow facing outward, the hole positions of stacked modules must line up and an anti-tipping bracket secures the tower. Several towers are connected to the inverter in parallel and switched on one by one.
Communication with the inverter is RS485 or CAN, and the manufacturer states compatibility with leading inverter brands without publishing a list in the manuals; the tower operating voltage, from 192V with two G1 modules up to 691.2V with six, must suit the battery input of the chosen inverter. Built-in Wi-Fi and Bluetooth on the control unit report data to the Fsolar app.
The touch screen shows summary data for the whole parallel system, including total state of charge, current, number of paralleled towers and heating state, plus cell voltages and temperatures for every module. On -H systems the heating can run in immediate mode, triggered only by minimum cell temperature, or strategic mode with an SOC threshold and allowed time window, powered either by the battery itself or by the inverter.
At least two and at most six modules per control unit, giving 10.24kWh to 30.72kWh.
Yes, up to six per tower. The G2 system supports balancing between new and old modules; the G1 manual advises against mixing old and new batteries.
The enclosure is IP65 and the manuals allow outdoor installation in a location shielded from direct sunlight, wind, dust and corrosive gases.
A heating function, configurable on the control unit, that allows charging and discharging down to -20°C.

Felicity Solar
100A
Available — quantity not tracked

Felicity Solar
100A
Available — quantity not tracked

Redarc
100A12V
Available — quantity not tracked

Redarc
100A12V
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.