
Dyness
EnerCore DH200F-S150L01
215kWh768V100kW
Available — quantity not tracked

Dyness · Commercial storage system (BESS)
261kWh832V125kW
Add the product to your quote and send the request. Within 1–2 working days we'll email you the final price, delivery included.
An Italian company selling batteries, inverters and solar equipment since 2015. Registered office in Sigillo (Perugia), VAT IT03894170541.
About usNew, genuine Dyness products with the full manufacturer's warranty and all their documentation.
DH200F-C260P125-S0 belongs to the newer DH200F-C260 generation of Dyness EnerCore all-in-one cabinets: thirteen 1P20S packs of 314Ah LiFePO4 cells for 261kWh (754–936V), a 125kW three-phase PCS, the EMS, air conditioning and a static transfer switch for on-grid and off-grid operation. S0 means no PV MPPT: photovoltaics, generators and EV chargers connect on the AC side. On-grid it outputs 125kW at 400V (200A maximum) and can draw up to 361A, so 125kW can feed the loads while another 125kW charges the battery; off-grid it supplies 125kW with fully unbalanced loads. Up to 10 units run in parallel on-grid (2.61MWh) and 4 off-grid with the SCC-AC switching cabinet. 2000×1345×2200mm, 2900±100kg, IP55, C3.
EnerCore DH200F packs a complete commercial storage system into one outdoor cabinet: lithium iron phosphate battery packs with a BDU and BMS, a bidirectional three-phase PCS, the EMS, power distribution, an air conditioner and a fire protection system, plus optional MPPT modules for DC-coupled photovoltaics and an optional static transfer switch (STS) for off-grid operation. The 215kWh DH200F uses fifteen 1P16S packs of 280Ah cells (696–864V) and a 100kW PCS rated for 167A at 400V.
The model code describes the options. In the 215kWh DH200F the number after S is the PV power (S150 = three 50kW MPPT modules, S000 = no PV) and L01 means off-grid capable with STS, L00 grid-connected only. The newer DH200F-C260 generation uses thirteen 1P20S packs of 314Ah cells for 261kWh (754–936V) and a 125kW PCS with STS as standard; there P124 or P125 gives the rated power and S0 or S4 the number of MPPT channels.
On-grid, the 215kWh DH200F delivers 100kW, and up to 12 units can be paralleled for 1.2MW and 2.58MWh. With the STS (L01 versions) it switches to off-grid in less than 20ms and supplies 100kVA with fully unbalanced loads; the manual allows up to 5 units off-grid. Each MPPT accepts 200–670V and 100A. AC coupling of PV, diesel generators and EV chargers is supported on all versions.
DH200F-C260 outputs 125kW at 400V with 200A maximum, and can draw up to 361A from the grid so that 125kW feeds the loads while another 125kW charges the battery. Up to 10 units run in parallel on-grid (2.61MWh) and 4 off-grid with the SCC-AC switching cabinet; S4 versions add four 63kW MPPT inputs of 200–720V.
Both generations use three-level fire detection with multi-sensor and water-ingress detectors, aerosol and water extinguishing, an audible and visual alarm and explosion-proof ventilation. The cabinets are IP55 and corrosion class C3 and work from -20 to 50°C with derating above 45°C, up to 3000m.
The 215kWh DH200F measures 1845×1190×2250mm in the datasheet and weighs 2800±100kg (S150L01), with a 3kW air conditioner; DH200F-C260 measures 2000×1345×2200mm, weighs 2900±100kg and has a 5kW air conditioner with 3kW heating. Cabinets can be installed side by side, and external wiring of several units is gathered in a combiner cabinet.
A touch screen on the cabinet and the EMS, reachable over Ethernet, 4G and RS485 (plus CAN on the C260), handle operating modes such as peak shaving, load shifting and demand response, with remote monitoring and updates. The DH200F datasheet lists CE, LVD and UN38.3; DH200F-C260 adds IEC 62619, IEC 63056, EN 62477-1, IEC 62933-5-2, UL 9540A, EN 50549 and national grid codes such as VDE-AR-N 4105/4110/4120, G99 and C10/11.
In the 215kWh DH200F, S followed by a number is the PV power from the built-in MPPT modules (S150 = 150kW, S000 = none), and L01 means the cabinet has the STS for off-grid operation, L00 that it is grid-connected only.
Yes, on the AC side: Dyness supports AC-coupled PV, diesel generators and EV chargers. Only DC coupling needs the MPPT versions.
Up to 12 DH200F units on-grid (2.58MWh) and 5 off-grid; up to 10 DH200F-C260 units on-grid (2.61MWh) and 4 off-grid with the SCC-AC switching cabinet.
DH200F-C260 is the newer generation, with 314Ah cells for 261kWh instead of 280Ah cells for 215kWh, a 125kW PCS instead of 100kW, STS as standard and an extended list of grid-code certifications.

Dyness
215kWh768V100kW
Available — quantity not tracked

Dyness
215kWh768V100kW
Available — quantity not tracked

Solis
261.24kWh832V125kW
Available — quantity not tracked

Deye
215kWh100kW
Available — quantity not tracked

Solis
120.57kWh384V60kW
Available — quantity not tracked

Solis
120.57kWh384V60kW
Available — quantity not tracked
Email updates for installers and people planning a PV or storage system. Pick your topics: no spam, unsubscribe in one click.